90701d02ae3da0e5a21abbd900c25748 XL
iConverter® 1000FF
  • Conforms to IEEE 802.3 and 1000BASE-X specs
  • Module supports a constant rate signal from 500Mbps to 1250Mbps
  • Supports MM and SM DF; and SM SF with SC connectors
  • User-selectable link fault detection modes facilitate quick fault detection, isolation and reporting
  • LED displays for immediate visual status of each port
a27a3b73d355048c6bab885897085f62 XL
iConverter® OC3FF
  • Support for OC3 over ATM or S1T
  • Module supports a constant rate signal from 1Mbps to 155Mbps
  • Supports MM and SM DF with ST and SC connectors; and SM SF with SC connectors.
  • User-selectable link fault detection modes facilitate quick fault detection, isolation, and reporting
  • LED displays for immediate visual status of each port
220c08548cac211cc7db219bb52f46cf XL
iConverter® OC12FF
  • Support for OC12 over ATM or S1T
  • Supports MM and SM DF; and SM SF with SC connectors
  • User-selectable link fault detection modes facilitate quick fault detection, isolation and reporting
  • LED displays for immediate visual status of each port
  • Plug-in modules are hot-swappable in 19-Module, 5-Module, 2-Module or 1-Module chassis
d3b3799d6611d677944f5f86a500beb3 XL
iConverter® xFF
  • SFP to SFP protocol-transparent fiber converter
  • Supports Ethernet, Fast Ethernet and Gigabit Ethernet
  • Supports S1T (OC-3/12/48) and SDH (STM-1/4/16)
  • Supports 1x/2x/4x/8x Fibre Channel
  • Supports Common Public Radio Interface (CPRI) line rates up to 6.144Gbps
0548677e6432786dd8df61eb3aaec139 XL
iConverter® T1/E1
  • RJ-48 to fiber media converter that supports ANSI, AT&T, ETSI and ITU standards
  • Supports T1, E1 and Primary Rate Interface voice and data
  • Supports AMI, B8ZS and HDB3 line codes
  • Easy configuration of T1/E1 line codes and line build-out
  • Supports MM and SM DF with ST, SC and LC connectors; and SM SF with SC connectors
954fb0ebf1d84fb921bfb0b6e045d57f XL
iConverter® T3/E3
  • T3 (DS3) or E3 Coax to fiber media converter
  • Supports B3ZS and HDB3 line codes
  • Supports MM and SM DF with ST, SC and LC connectors; and SM SF with SC connectors
  • Supports SFP transceivers with standard, CWDM and DWDM wavelengths
339a0e1449b6b4062056bc300d87e893 XL
iConverter® RS232
  • Serial RS-232 to fiber media converter with automatic data rate detection
  • Supports bit rates ranging from 110 bps to 921,600 bps
  • MM, SM DF with ST, SC and LC connectors, and SM SF with SC connectors
  • DB-9 and Terminal Block connector options for serial RS-232 interface
  • DIP-switch configuration of DTE or DCE device for easy connection to serial devices
83c2446a0896df0a1f4af01c940ae1d9 XL
iConverter® RS422/485
  • Automatic Full-Duplex data rate detection
  • Supports full-duplex bit rates ranging from 110 bps to 1,024,000 bps
  • Supports distances up to 5km on MM and 120km on SM
  • DB-9 and Terminal Block connector options for serial interface
  • MM, SM DF with ST, SC and LC connectors, and SM SF with SC connectors
00d9b1e39f02d57be65ad2a9a6eaa3b8 XL
iConverter® 10/100VT
  • 10BASE-T or 100BASE-TX to Fast Ethernet fiber converter with 1536 bytes maximum frame size
  • Supports IEEE 802.1Q Tag VLAN (with Q-in-Q) and Port VLAN
  • Supports IEEE 802.1p Prioritization QoS
  • Individual Port Bandwidth and Port Access Controls
  • Fiber port supports MM, SM, and SF with ST, SC and LC connectors
c3997142576e6f4d163ead570965368d XL
iConverter® 4xT1/E1 MUX
  • Multiplexes 4 independent T1 or E1 channels from copper links into 1 fiber link
  • Optional 10/100 copper Ethernet service multiplexed with T1/E1 circuits
  • SFP transceivers with Optical Statistics for standard, CWDM or DWDM applications
  • Supports AMI, B8ZS and HDB3 line codes
  • Fixed-fiber connectors support MM, SM DF with ST, SC and LC connectors, and SM SF with SC connectors
9415f9bcd76598f9c08127db1641b596 XL
iConverter® 4xT1/E1 MUX/M
  • Multiplexes 4 independent T1 or E1 channels from copper links into 1 fiber link
  • 10/100/1000 copper Ethernet multiplexed with T1/E1 circuits
  • Ethernet port supports 10/100/1000 and Half/Full-Duplex auto-negotiation and MDI/MDIX auto-crossover
  • 1000Mbps SFP transceivers with Optical Statistics for standard, CWDM or DWDM applications
  • Supports AMI, B8ZS and HDB3 line codes
e9c724eeb5636d1c1c1a2c2e85d40377 XL
iConverter® X21
  • X.21 and RS-530 Serial to Fiber media converter
  • Auto-configuration of baud rates
  • DCE-sourced or terminal clock modes
  • Supports serial data rates up to 8.192Mbps
  • SFP transceivers with Optical Statistics for standard, CWDM or DWDM wavelengths
be28adfff47893c4519c1307dc6b8866 XL
iConverter® CWDM/X
  • 4 and 8 channels multiplexer/demultiplexer modules
  • Protocol and rate transparent up to 10Gbps
  • Compact form factor with up to 120 ports in a 2U chassis
  • Industry standard LC UPC or APC connectors
  • Scalable to 8 or 16 channels using an optional Exp Port or Band Splitter
4695cb3b19cbf906e45dac0da0913068 XL
iConverter® Single-Fiber CWDM Multiplexers and Add/Drop
  • 2 and 4-Channel modules are scalable to 4 or 8 Channels using a Band Splitter module
  • Protocol and rate transparent for applications up to 10Gbps
  • Minimal and uniform optical loss facilitates easy network planning
  • Industry standard LC connectors
  • Highly compact form factor
2cebfdae7a8ea5d691033c085990a9d4 XL
iConverter® 10/100M2
  • Carrier-Grade optical Ethernet Network Interface Device
  • Integrated IPv4, SNMPv1/v2c/v3, Telnet and IP-less 802.3ah management
  • SNMP management via NetOutlook? software
  • 802.3ah Link OAM for early fault detection and performance monitoring
  • Supports DF and SF 100BASE-FX SFP transceivers for standard, CWDM or DWDM wavelengths
d6086de322f98f66cc694f32ea284557 XL
iConverter® GX/TM2
  • Carrier-Grade optical Ethernet Network Interface Device
  • Integrated IPv4, SNMPv1/v2c/v3, Telnet and IP-less 802.3ah management
  • SNMP management via NetOutlook? software
  • 802.3ah Link OAM for early fault detection and performance monitoring
  • Supports DF and SF Gigabit SFP transceivers for standard, CWDM or DWDM wavelengths
  • Supports 802.1ad Q-in-Q, QoS, Port Access Control and MIB statistics
245effadf41c6129f4fe7accc564ef86 XL
iConverter® GM3 Network Interface Devices
  • 100/1000Mbps MEF Carrier Ethernet Fiber Access NID
  • Integrated IPv4, SNMPv1/v2c/v3, Telnet and IP-less 802.3ah OAM management
  • SNMP management via NetOutlook? software
  • Supports DF and SF Gigabit and Fast Ethernet SFP transceivers for standard, CWDM or DWDM wavelengths
  • Supports 802.1ad Q-in-Q, QoS, Port Access Control and MIB statistics
5483e331a9bace540b3a2478fc014e25 XL
iConverter® 2FXM2
  • Carrier-Grade optical Ethernet Network Interface Device
  • Can be used as fiber mode converters, CWDM or DWDM transponders, or fiber repeaters supporting the three Rs (regeneration, retiming and reshaping).
  • Integrated IPv4, SNMPv1/v2c/v3, Telnet and IP-less 802.3ah management
  • Supports DF and SF 100BASE-X SFP transceivers for standard, CWDM or DWDM wavelengths
  • Supports 802.1ad Q-in-Q, QoS, Port Access Control and MIB statistics
68b62085e41e8f225811766f8d5eb2bb XL
iConverter® 2GXM2
  • Carrier-Grade optical Ethernet Network Interface Device
  • Can be used as fiber mode converters, CWDM or DWDM transponders, or fiber repeaters supporting the three Rs (regeneration, retiming and reshaping).
  • Integrated IPv4, SNMPv1/v2c/v3, Telnet and IP-less 802.3ah management
  • SNMP management via NetOutlook? software
  • Supports DF and SF Gigabit SFP transceivers for standard, CWDM or DWDM wavelengths
13f34e2b533e12c6166f88368dcd8c07 XL
SFP Transceivers for CWDM Wavelengths
  • Omnitron optical CWDM transceivers enable flexible fiber and copper connectivity between existing equipment and CWDM Multiplexers
  • Compatible with Omnitron products that support SFP transceivers
  • Supports standard wavelengths in the spectrum defined by ITU-T G.694.2
  • Compliant with MSA SFF-8472 standard, which provides interoperability with other network devices
  • Digital Diagnostic capability
852967248dd3e6cb3942a1fe6af42945 XL
SFP Optical Transceivers
  • Omnitron SFP Optical Transceivers enable flexible fiber and copper connectivity
  • Compatible with iConverter media converter modules, T1/E1 Multiplexers and Network Interface Devices that support SFP transceivers
  • Compatible with FlexPoint, OmniConverter, RuggedNet and miConverter media converter modules that support SFP transceivers
  • Compliant with IEEE 802.3u Fast Ethernet and 802.3z Gigabit Ethernet specs
  • Supports operational data rates for S1T OC-3/12/48, SDH STM-1/4/16, and Fiber Channel x1/x2
51a3864ed3ad604d2340c3f8fe249f94 XL
iConverter® GM4 Network Interface Devices
  • 100/1000Mbps MEF Carrier Ethernet 2.0 Fiber Access NID
  • Smallest full-function NIDs available with the lowest power consumption
  • ITU-T Y.1564 Ethernet Service Activation Testing
  • IETF RFC 2544 Ethernet Service Activation Testing
  • IPv4, IPv6, SNMPv1/v2c/v3, SSH, Telnet and IP-less 802.3ah OAM management
358873fad4914931314b94f2036b503a XL
iConverter® XGT+
  • 10GBASE-T Ethernet Media Converter
  • Copper to Fiber interfaces: RJ-45 to XFP or RJ-45 to SFP+
  • Supports CWDM, DWDM and tunable DWDM fiber transceivers
  • Supports MSA power level 4 XFP transceivers
  • Omnitron transceivers support XFP and SFP+ digital diagnostics reporting via LEDs or management module
85217272b4e7187cce0880e98f060661 XL
iConverter® GM4 PoE+ and GM4 HPoE
  • PoE sourcing of 802.3af (15W), 802.3at (30W) and High-Power PoE (60W)
  • MEF Carrier Ethernet 2.0 Network Interface Device
  • Integrated IPv4, IPv6, SNMPv1/v2c/v3, SSH, Telnet and IP-less 802.3ah OAM management
  • SNMP management via NetOutlook? Network Management Software
  • Supports DF and SF Gigabit and Fast Ethernet SFP transceivers for standard, CWDM or DWDM wavelengths
Results 25 - 48 of 65