RuggedNet® 10GMG/Mi

Managed Industrial Multi-Gigabit/Multi-Rate 100M, 1G, 2.5G, 5G, 10G Ethernet Switch


  • Managed Industrial 10G multi-gigabit/multi-rate Ethernet Switch
  • One SFP/SFP+ transceiver uplink port or multi-gigabit/multi-rate copper port
  • SFP/SFP+ uplink port supports copper and fiber transceivers
  • Multi-gigabit/multi-rate ports supports speeds of 100Mbps, 1Gbps, 2.5Gbps, 5Gbps and 10Gbps
  • Two multi-gigabit/multi-rate RJ-45 and two 10/100/1000 RJ-45 downlink/access ports
  • Supports jumbo frames up to 10,240 bytes
  • Management via IPv4, IPv6, Web, Telnet, SSH, SNMPv1/v2c/v3 and serial interfaces
  • Easy to use Hierarchical Command Line Interface
  • SNMP management via Omnitron’s NetOutlook® management software, or third-party SNMP software
  • Directed Switch mode AKA Camera mode to prevent port flooding
  • Alarm contacts and sensors
  • AC to DC Power Adapter or 2-Pin DC terminal
  • Wall, Rack and DIN-rail mountable
  • Industrial (-40 to 75º C) operating temperature
  • TAA, BAA and NDAA compliant, and Made in the USA
  • Free 24/7/365 Technical Support


  • IEEE 802.1x, RADIUS, TACACS+ and ACL
  • Email Notification
  • IPv4 Internet Group Management (IGMP) and IPv6 Multicast Listener Discovery (MLD) snooping
  • DHCP Relay Option 82, DHCPv6 and DHCPv6 Relay
  • IEEE 802.1ab Link Layer Discovery Protocol
  • Rate Limiting, Queue prioritization and Class of Service
  • IEEE 802.1Q VLAN tagging and IEEE 802.1ad Q-in-Q
  • Broadcast / Multicast / Unicast Storm Prevention
  • Static MAC configuration and blocking of unknown Unicast/Multicast addresses
  • SNTP / NTP and time of day


The RuggedNet 10GMG/Mi are managed industrial multi-gigabit Ethernet switches featuring one 1/10G SFP/ SFP+ or multi-gigabit/multi-rate RJ-45 uplink port with two multi-gigabit/multi-rate RJ-45 and two 10/100/1000 RJ-45 downlink/access ports.

The RJ-45 user ports support multi-gigabit/multi-rate speeds of 100Mbps, 1Gbps, 2.5Gbps, 5Gbps and 10Gbps.

The RuggedNet switches feature a Small Form Pluggable (SFP) transceiver receptacle port supporting a variety of copper and fiber transceivers. It supports 10/100/1000BASE-T, 1000BASE-T, 2.5GBASE-T, 5GBASE-T and 10GBASE-T copper transceivers and 1G and 10G multimode or single-mode fiber, dual or single-fiber transceivers in standard, CWDM and DWDM wavelengths.

All models support Directed Switch mode, which directs multicast traffic (such as video) only to the appropriate uplink port, preventing multicast traffic from flooding other network ports.

The mode of operation can be configured using easily accessible DIP-switches or using Web, Telnet, SSH, SNMPv1/v2c/v3 or Serial Console management interfaces. IPv4 and IPv6 are supported on the switches. These management interfaces provide access to filtering and security options, such as, broadcast storm prevention, IGMP, IEEE 802.1x, RADIUS, TACACS+ and Access Control Lists. Email notification and alarm reporting is provided.

An alarm relay is available to detect user configured events. The relay contact can be configured for normally open or normally closed operation. One alarm input is available for detecting external events such as door open or closed.

All models can be wall or rack mounted using a wall mount bracket and shelf or DIN-rail mounted using the included DIN-rail mounting clip. They are available with dual DC input power.


Security and Small Cell Application

In this industrial manufacturing application example, IP cameras and Wi-Fi 6/6E Access Points are installed throughout a large manufacturing facility. An iConverter® XM5 aggregation fiber switch is used to distribute a fiber link from a control room to RuggedNet switches with a fiber SFP port.

The RuggedNet 10GMG/Mi provides a fully managed solution to an IP camera and Wireless Access Point at each location, each of which can be located up to 100 meters from the switches.

The camera and access point have full bandwidth capability utilizing the 10G fiber uplink port on each 10GMG/Mi switch. Ceiling App RuggedNet 10GMG Mi

Small Cell

Small cell devices are increasing their demand on bandwidth requirements. Speeds of 10Gbps is common with today’s small cell devices.

In this application example, high-speed small cell devices requiring up to 10Gbps bandwidth are deployed around several buildings. An iConverter® XM5 aggregation fiber switch is used to distribute a fiber link to each RuggedNet switch.

The RuggedNet 10GMG/Mi switches provides a managed solution with speeds up to 10Gbps on the RJ-45 user ports.

Small Cell App RuggedNet 10GMG Mi



RuggedNet® 10GMG/Mi

Managed Industrial 10Gigabit Multi-Gigabit/Multi-Rate Ethernet Switch

Standard Compliances IEEE 802.3, IEEE 802.1Q, IEEE 802.1ad, IEEE 802.1ab, RFC 5424, RFC 4541, RFC 2710, IEC 624339-2, SMTP, SNTP, RADIUS, TACACS+, IEEE 802.1x
Regulatory Compliances

Safety:  UL 62368-1, UL 60950-1,

              IEC 62368-1, IEC 60950-1,

              EN 62368-1, EN 60950-1,

              CAN/CSA C22.2 No. 62368-1-14, CAN/CSA C22.2 No. 60950-1,

              CE Mark, UKCA

EMC:     EN 55032/24 CE Emissions/Immunity,

              IEC 61000-6-4 Industrial Emissions,

              IEC 61000-6-2 Industrial Immunity

EMI:      CISPR 32,

              FCC 47 Part 15 Subpart B Class A

EMS:     IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV,

              IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m (on UTP cabling) and 20 V/m (on STP cabling)

              IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV,

              IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV,

              IEC 61000-4-6 CS: Signal: 10 V,

              IEC 61000-4-8 ( Magnetic Field), 30A/m,

              IEC 61000-4-11 (General Immunity in Industrial Environments)

IP Rating: IP40 Protection


Environmental REACH, RoHS and WEEE

IPv4 and IPv6 address

Web, Telnet, SSH, SNMPv1/v2c/v3

In-Band management via Ethernet port, Out-of-band management via serial port

Frame Size Up to 10,240 bytes
Port Types

Copper:     100/1000BASE-T, 2.5GBASE-T/5GBASE-T/10GBASE-T (RJ-45)

                   10/100/1000BASE-T (RJ-45)

SFP/SFP+: 10GBASE-X Fiber Transceivers,

                   10GBASE-T Copper Transceivers 1000BASE-X Fiber Transceivers,

                   1000BASE-T Copper Transceivers 10/100/1000BASE-T SGMII Copper Transceivers

                   100/1000/2.5G/5G/10GBASE-T Multi-rate Copper Transceivers

Serial:         RS-232 (RJ-45)

Cable Types

Copper: Twisted-pair cable up to 100 meters

              10BASE-T: 4-pair UTP Cat 3, 4, 5, 5e, 6, 6A

              100BASE-TX: 4-pair UTP Cat 5, 5e, 6, 6A

              1G/2.5G: 4-pair UTP Cat 5e, 6, 6A, 7

              5G: 4-pair UTP Cat 6, 6A, 7

              10G: 4-pair UTP Cat 6A, 7

Fiber:    Multimode: 50/125, 62.5/125µm

              Single-mode: 9/125µm

DC Power Requirements

+12 to +57VDC;

0.93A @ 12VDC

0.23A @ 48VDC

2 Pin Terminal (isolated)

Alarm Contact (Output)

2 form C Relay for Normally Open and Normally Closed Operation

110VDC/125VAC Maximum Voltage

2A Maximum Current

Alarm Sensor (Input)

2.0ma @ 3.3VDC Closure Detection

Dimensions (W x D x H) 1.5” x 5.2” x 5.5” (38.1 mm x 132.1 mm x 139.7 mm)
Weight 1.5 lbs. (680 grams)
Operating Temperature Industrial: -40 to 75°C
Storage: -40 to 80°C
Humidity 5% to 95% (non-condensing)
Altitude -100m to 4,000m (operational)
MTBF (hrs) 229,000
5 year product warranty with 24/7/365 free Technical Support


RuggedNet 10GMG/Mi Models
Model NumberDescription
9665-0-14-2t 10GMG/Mi - 1 x SFP+ + 2 x 100/1G/2.5G/5G/10G RJ-45 ports + 2 x 10/100/1000 RJ-45 ports, dual power inputs (2-pin terminal block), industrial temperature range -40 to 75°C
9665-1-14-p2 10GMG/Mi - 1 x 100/1G/2.5G/5G/10G RJ-45 + 2 x 100/1G/2.5G/5G/10G RJ-45 ports + 2 x 10/100/1000 RJ-45 ports, dual power inputs (2-pin terminal block), industrial temperature range -40 to 75°C
Contact Omnitron for other fiber options. Order the appropriate SFPs separately. Visit the Omnitron Optical Transceivers web page. web page.


Model NumberDescription Wall Mount Plate 
 8260-3  Wall Mounting Plate
 8260-0  19" rack mount shelf