RuggedNet® GXPoE+/Si and GXHPoE/Si

Industrial Unmanaged 30W and 60W Gigabit PoE Extender with Booster Technology



Features


Industrial Unmanaged 30W and 60W Gigabit PoE Extender with Booster Technology

  • Multiple port configurations:
    • 1 RJ-45 PoE/PD + 1 RJ-45 PoE/PSE
    • 1 RJ-45 PoE/PD + 2 RJ-45 PoE/PSE
  • Can be Powered by IEEE 802.3at or High-Power PoE 60W Power Sourcing Equipment
  • Can Power IEEE 802.3af PoE, IEEE 802.3at or High-Power PoE 60W Powered Devices
  • Voltage-boosting technology to guarantee minimum voltage requirement to the Powered Device
  • Plug-and-Play installation with auto-negotiation of data rates and duplex modes
  • Supports jumbo frames up to 10,240 bytes
  • Wall and DIN-rail mountable
  • Industrial (-40 to +75ºC) operating temperature range
  • Free 24/7/365 Technical Support
  • Lifetime warranty
  • Made in the USA




Description


RuggedNet Industrial GXPoE+/Si and GXHPoE/Si are unmanaged gigabit PoE Extenders that enable the delivery of Ethernet data and Power over Ethernet (PoE) beyond the standard 100 meter limit of twisted pair copper cabling.

RuggedNet Industrial PoE Extenders provide cost-effective distance extension and connectivity to remote PoE devices where external power is not available or hard to provision, or when replacing copper with fiber becomes cost prohibitive.

RuggedNet Industrial PoE Extenders are 10/100/1000BASE-T Ethernet extenders that function as both Powered Devices (PD) and Power Sourcing Equipment (PSE), and require no external AC power. They feature one PoE/PD port and one or two PoE/PSE ports, and can be powered by an IEEE 802.3at or High-Power PoE 60W power source, such as a RuggedNet GHPoE/Si or GHPoE/Mi High-Power 60W PSE switch.

Utilizing data regeneration and voltage level boosting capabilities, RuggedNet Industrial PoE Extenders can be daisy-chained to break through the Ethernet copper distance barrier and deliver 10/100/1000 data and power to multiple PoE powered devices.

Due to cable resistance, voltage drop across the cabling could lower the voltage below the minimum standard requirement of the attached PD. RuggedNet PoE Extenders have smart voltage-boosting technology to maintain the required standard compliant PoE voltage levels between hops.

The PoE Extenders automatically negotiate and deliver the power level required by a Powered Device (PD) partner. When a non-PoE device, such as a laptop, is connected to the PoE Extenders for data only applications, no power is applied.

RuggedNet Industrial PoE Extenders are plug-and-play devices that support auto-negotiation of data rates and duplex modes for simple in-line installation to instantly extend industrial network distances. The PoE Extenders are fully operational once a PSE is connected to the PoE/PD port, displaying power and operational status without a PD attached. This facilities the installation and troubleshooting by ensuring each link is operational.

The RuggedNet Industrial PoE Extenders can be wall mounted with an optional wall mount bracket or DIN-rail mounted using the included DIN-rail mounting clip.





Examples


Basic PoE Extender Application

This example shows a RuggedNet PoE Extender powering an 802.3at PoE camera, and achieving a distance of 200 meters (656 feet) between an 802.3at PoE PSE switch and the camera.Product_Extender_200_meters.jpg

 

PoE Extender with Two Powered Devices Application

This example shows a RuggedNet PoE Extender with two PoE/PSE ports powering an 802.3af camera and an 802.3at Wi-Fi Access Point 200 meters from the High-Power PoE 60W PSE switch.

Product_Extender_200_meters_2x.jpg

 

PoE Drop-and-Extend Application

In this example, three RuggedNet PoE Extenders are deployed in a daisy chain that is powered by a High-Power 60W PSE switch. PoE cameras are dropped off at the first and second PoE Extender locations using models with one RJ-45 PoE/PD port and two RJ-45 PoE/PSE ports.

The daisy chain continues to the third PoE Extender, and to the final PoE camera for a distance of 400 meters (1,312 feet).
Product_Extender_700_meters.jpg

 

PoE Extender Daisy Chain Applications

In this example (A), six RuggedNet PoE Extenders are deployed in a daisy chain extending the distance between a High-Power PoE PSE switch and an 802.3af PoE camera.

The total distance between the switch and the camera is 700 meters (2,296 feet). With Omnitron’s exclusive voltage boosting technology, the input voltage at the PoE camera is guaranteed to meet the IEEE standard (see Distance and Power table).

Product_Extender_Drop_Extend.jpg

(A)

 

In this example (B), an Ethernet data only application is shown. The camera at the end of the daisy chain is AC powered from a local source.

A combination of GXHPoE/Si or GXPoE+/Si Extenders can achieve a distance of up to 800 meters with a High-Power PoE 60W power source, such as a RuggedNet GHPoE/Si or GHPoE/Mi High-Power 60W PSE switch, at the head end.

PoE Extender 800 meters

(B)





Specifications


Description RuggedNet GXPoE+/Si and GXHPoE/Si
10/100/1000BASE-T Ethernet PoE/PD to PoE/PSE Extenders
Standard Compliances IEEE 802.3, IEEE 802.3at PoE+, High-Power 60W PoE
Environmental REACH, RoHS and WEEE
PoE/PD Mode IEEE Alternate A (Alt A)
Frame Size Up to 10,240 bytes
Port Types
Copper: 
10/100/1000BASE-T (RJ-45)
Cable Types
Copper: 
EIA/TIA 568A/B, Cat 5 UTP and higher
Power Requirements PoE/PD (input):
PoE/PSE (output):
+/-42.5 to +/-57VDC (per IEEE)
+/-50 to +/-57VDC (per IEEE)
56VDC (typical)
Dimensions W: 1.5” x D: 5.5” x H: 5.5”
L: 38.1 mm x B: 139.7 mm x H: 139.7 mm
Weight 1.56 lb.; 708 grams
Operating Temperature*
Extended: 
-40 to +75°C
Humidity 5% to 95% (non-condensing)
Altitude -100m to 4,000m (operational)
MTBF (hrs)
1xPD Port+1xPSE Port:
1xPD Port+2xPSE Ports:
375,000
317,000
Warranty
Lifetime warranty with 24/7/365 free Technical Support
* For commercial (0 to +50°C) and wide (-40 to +60°C) operating temperature ranges, refer to the OmniExtender PoE Extender.
 

 

Standards and Compliances

 

Safety**
UL 60950-1
IEC 60950-1:2005+A1:2009 and
EN 60950-1:2006+A11:2009+A1:2010+A12:2011
CE Mark
EMC
EN 55032/24 CE Emissions/Immunity
IEC 61000-6-4 Industrial Emissions
IEC 61000-6-2 Industrial Immunity
EMI CISPR 32, FCC 47 Part 15 Subpart B Class A
EMS
IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m (passed industrial rating of 10V/m)
IEC 61000-4-4 EFT: Power: 1 kV (passed industrial rating of 2 kV)
IEC 61000-4-4 EFT: Signal: 0.5 kV (passed industrial rating of 1 kV)
IEC 61000-4-5 Surge: Power: 1 kV (passed industrial rating of 2 kV)
IEC 61000-4-5 Surge: Signal: 1 kV
IEC 61000-4-6 CS: Signal: 3 Vrms (passed industrial rating of 10 Vrms)
IP Rating IP40 Protection
** Pending
 

 

Distance and Power

 

PSE
Source
Power
Number
of
Extenders
Distance
Meters / Feet
Available Power for PD
per Cable Type
Category
5
Category
5e
Category
6
802.3at
30W
1 200m / 656 ft. 17.6 watts 18.6 watts 19.9 watts
2 300m / 984 ft. 11.3 watts 12.2 watts 13.5 watts
3 400m / 1,312 ft. 6.0 watts 6.7 watts 7.9 watts
4 500m / 1,640 ft. 1.2 watts 1.8 watts 2.9 watts
High-Power
60W
1 200m / 656 ft. 38.8 watts 40.8 watts 43.5 watts
2 300m / 984 ft. 29.2 watts 31.1 watts 34.0 watts
3 400m / 1,312 ft. 21.4 watts 23.2 watts 25.9 watts
4 500m / 1,640 ft. 14.8 watts 16.6 watts 19.0 watts
5 600m / 1,968 ft. 9.1 watts 10.7 watts 12.9 watts
6 700m / 2,296 ft. 4.0 watts 5.4 watts 7.4 watts
7 800m / 2,624 ft. - Data Only 2.4 watts
Distances are based on a daisy chain topology with no drop locations along chain. Distances also based on using certified Cat5, Cat5e or Cat6 cabling with no patch cables or panels.




Ordering


Model NumberDescription
2200-11Z GXPoE+/Si with 1 RJ-45 PoE/PSE, Industrial Temperature
2200-12Z GXPoE+/Si with 2 RJ-45 PoE/PSE, Industrial Temperature
2201-11Z GXHPoE/Si with 1 RJ-45 PoE/PSE, Industrial Temperature
2201-12Z GXHPoE/Si with 2 RJ-45 PoE/PSE, Industrial Temperature
 
 
Accessories
Model NumberDescription
8260-3 Wall Mounting Plate
8260-0 1U Rack Mount Shelf


Ask a Question

(*) Required field

1000 characters left