OmniConverter® Media Converters, Extenders, and Switches with Power over Ethernet
OmniConverter PoE Media Converters and Enterprise PoE Switches provide network distance extension over fiber optic cabling to PoE Powered Devices (PDs). Classified as Power Sourcing Equipment (PSE), OmniConverter compact PoE switches and PoE media converters can provide PoE, PoE+, HPoE, and IEEE 802.3bt using standard UTP cables that carry the Ethernet data. OmniConverter PoE Extenders provide cost-effective distance extension over copper UTP cabling to remote PoE, PoE+ and HPoE devices where external power is not available or hard to provision, or when replacing copper with fiber becomes cost prohibitive.
- Supports IEEE 802.3af PoE (15.4W), IEEE 802.3at PoE+ (30W), HPoE (60W) and IEEE 802.3bt (60W and 100W)
- Made in the USA and TAA compliant
- Temperature hardened for outdoor deployments
- Free 24/7 Technical Support
- Features SFP pluggable fiber optic ports for use with MSA compliant SFP transceivers
- Proven standards compliance and network interoperability
- Learn more about PoE distance extension over fiber
OmniConverter PoE Media Converters and PoE Switches
Wide Variety of Configurations and Features to Fit Any Deployment
OmniConverter PoE Media Converters and PoE Switches are available in a wide variety of port configurations, PoE power levels, management options, and temperature ranges.
- Supports 1, 2, 4 or 8 PoE RJ-45 Ports
- Features fixed-fiber connectors or SFP transceivers with 1 or 2 Uplink Ports
- Supports PoE (15.4W), PoE+ (30W), HPoE (60W) and IEEE 802.3bt (60W and 100W)
- Managed and Unmanaged
OmniConverter PoE Media Converters
OmniConverter PoE Media Converters are unmanaged, multi-port media converters that feature one or two RJ-45 ports and one or two fiber ports.
OmniConverter PoE Media Converters can be deployed as standalone modules with integrated wall mount brackets, or installed in a rack mount shelf.
- Power over Ethernet injector/source
- Supports PoE (15.4W), PoE+ (30W), HPoE (60W) and IEEE 802.3bt (60W and 100W)
- Supports 10/100 and 10/100/1000 Ethernet
- Multiple port configurations available
- Supports fixed-fiber connectors or SFP transceivers
- Full feature models and low-cost models
- Available in AC or DC models
- Commercial (0º to 50ºC), wide (-40º to 60ºC) and extended
(-40º to 75ºC) operating temperature ranges
OmniConverter PoE Switches
OmniConverter PoE Switches feature one or two uplink ports and four or eight 10/100/1000 RJ-45 ports, and are available as unmanaged or managed models. Managed models feature VLAN, rate limiting, Class of Service, Link Layer Discovery Protocol (LLDP), and Rapid Spanning Tree Protocol (RSTP).
OmniConverter PoE Switches provide enterprise network distance extension to up to eight PoE+ devices
- Multi-port ruggedized and temperature-hardened PoE fiber switch
- Supports PoE (15.4W), PoE+ (30W), and IEEE 802.3bt (60W and 100W)
- Multi-port PoE switch with:
- One or two 1G fiber uplink ports supporting ST, SC, LC and SFP transceiver
- Two 10/100/1000 RJ-45 uplink ports
- Two 1G/10G uplink ports supporting SFP/SFP+ transceivers
- Management is available via a Web GUI, Telnet, SSH, SNMP or Serial Console interface
- Supports a variety of data traffic switching modes
- Commercial (0º to 50ºC), wide (-40º to 60ºC) and extended
(-40º to 75ºC) operating temperature ranges
OmniConverter PoE Extenders
OmniConverter PoE Extenders provide cost-effective copper distance extension and connectivity to remote PoE devices
OmniConverter GXPoE+/S and GXHPoE/S are unmanaged 10/100/1000 PoE Extenders that enable the delivery of Ethernet data and Power over Ethernet (PoE) beyond the standard 100 meter limit of twisted pair copper cabling.
OmniConverter PoE Extenders function as both a Powered Device (PD) and Power Sourcing Equipment (PSE), and require no external AC power. They feature one PoE/PD port and one or two PoE/PSE ports, and can be powered by an IEEE 802.3at or High-Power PoE 60W switch.
OmniConverter Compact Ethernet Switches
OmniConverter Compact Ethernet Switches feature one or two uplink ports and four or eight 10/100/1000 RJ-45 ports, and are available as unmanaged or managed models.
OmniConverter Compact Ethernet Switches provide network distance extension to up to 8 x 10/100/1000 devices.
- Multi-port Ethernet switch with:
- One or two 1G fiber uplink ports supporting ST, SC, LC and SFP transceiver
- Two 10/100/1000 RJ-45 uplink ports
- Two 1G/10G uplink ports supporting SFP/SFP+ transceivers
- Management is available via a Web GUI, Telnet, SSH, SNMP or Serial Console interface
- Supports a variety of data traffic switching modes
- Commercial (0º to 50ºC), wide (-40º to 60ºC) and extended
(-40º to 75ºC) operating temperature ranges
Resource Center
Free Network Design
