Industrial DIN Rail Mountable 48VDC Power Supplies

120 watts to 960 watts

The Industrial DIN rail mountable 48VDC power supplies are designed for the environment



Features


  • Metal case, slim size
  • 94% high efficiency and complete functions
  • 130%~150% peak load capability by models
  • Built-in active PFC function
  • Protections: Short circuit / Overload / Over voltage / Over temperature
  • Convection cooling
  • Can be installed on DIN rail TS-35 / 7.5 or 15
  • UL 508 (industrial control equipment) approved
  • EN61000-6-2 (EN500B2-2) industrial immunity level
  • Built-in DC OK relay contact
  • -25 to 70C operating temperature range (-30 to 70C for SDR-960)
  • 3 year warranty




Description


The Industrial DIN rail mountable 48VDC power supplies are designed for the environment where a DC voltage power source is not available.  They are single 48VDC industrial DIN rail power supplies, which accept an AC input voltage of 88-264 AC (see detailed spec below) and provides 48VDC output with up to 960 watts (depending on the model). 

 

Model NumberDescription
9170-PS-120 Industrial DIN Rail Mounted Power Supply
Input: 88 - 264 VAC 47 to 63Hz *
Output: 48 - 55 VDC, 2.5A, 120 Watts 
9170-PS-240 Industrial DIN Rail Mounted Power Supply
Input: 88 - 264 VAC 47 to 63Hz *
Output: 48 - 55 VDC, 5.0A, 240 Watts 
9170-PS-480 Industrial DIN Rail Mounted Power Supply
Input: 90 - 264 VAC 47 to 63Hz *
Output: 48 - 55 VDC, 10.0A, 480 Watts 
9170-PS-960 Industrial DIN Rail Mounted Power Supply
Input: 180 - 264 VAC 47 to 63Hz **
Output: 48 - 55 VDC, 20.0A, 960 Watts

*Note: Input Voltage less than 100VAC the power supply derates. Please check data sheet for the derating curve details.

**Note: Input Voltage less than 200VAC the power supply derates. Please check data sheet for the derating curve details.