Managed Single Pair Power over Ethernet Switch

• Managed Single-Pair Power over Ethernet switch
• Modbus Industrial Protocol for device management and monitoring
• Supports IPv4 and IPv6
• IEEE 802.1x, RADIUS, TACACS+ and ACL
• Email Notification
• Rapid and Multiple Spanning Tree Protocol
• Media Redundancy Protocol (MRP)
• IEEE 802.1ax LAG and LACP; Active/Active and Active/Standby
• IEEE 802.1Q VLAN tagging and IEEE 802.1ad Q-in-Q
• Broadcast / Multicast / Unicast Storm Prevention
• DHCP Relay Option 82, DHCPv6 and DHCPv6 Relay
• IPv4 IGMP and IPv6 MLD snooping
• Rate Limiting, Queue prioritization and Class of Service
• IEEE 802.1ab Link Layer Discovery Protocol
• Static MAC configuration and blocking of unknown Unicast/Multicast addresses
• Management via Web, Telnet, SSH, SNMPv1/v2c/v3 and serial interfaces
• Easy to use Hierarchical Command Line Interface
• SNMP management via Omnitron’s NetOutlook® management software, or third-party SNMP software
• Dual Device mode for operating as two separate switches
• Directed Switch mode prevents flooding of multicast traffic
• Free 24/7/365 Technical Support

ADDITIONAL FEATURES

• Four IEEE 802.3cg Single-Pair Power over Ethernet SPoE 30/58VDC user ports
• Supports 3-Pin SPE Terminal connector or IEC 63171-2 SPE connector
• Two SFP or two 10/100/1000 RJ-45 uplink ports
• Supports 10/100/1000 and 1G copper SFP transceivers
• Supports 100Mbps and 1000Mbps fiber SFPs
• AC to DC Power Adapter or 2-Pin DC terminal
• Wall, Rack and DIN-rail mountable
• Fan-less design for long life
• Commercial (0º to 50ºC), wide (-40º to 60ºC) and extended (-40º to 75ºC) operating temperature ranges
• TAA, BAA and NDAA compliant, and Made in the USA

The OmniConverter GLPoE/M is a managed Single Pair Power over Ethernet (SPoE) switch that is IEEE 802.3cg compliant and features copper or fiber uplink ports and four single-pair 10BASE-T1L copper SPoE user ports.

The Single Pair Power over Ethernet switch features four IEEE 802.3cg compliant 10BASE-T1L 3-pin SPoE terminal ports or IEC 63171-2 SPoE ports and two 10/100/1000 RJ-45 or 100/1000 fiber SFP uplink ports.

The GLPoE/M SPoE user ports detect and classify 30VDC class 10 - 12 and 58VDC class 13 -15 powered devices through DIP-switch selection.

The switch supports Dual Device mode, Directed Switch mode and Protected Uplinks.

Dual Device mode enables the module to operate as two independent and isolated Ethernet switches. In Dual Device mode, the GLPoE/M provides separate and independent data traffic paths between the two uplink ports and four user ports.

Directed Switch mode directs multicast traffic (such as video) only to the appropriate uplink port, preventing the multicast video traffic from flooding other network ports.

The switch supports protected uplinks using industrial ring Media Redundancy Protocol (MRP) or Spanning Tree Protocol or Redundant uplinks for high availability industrial network applications.

For daisy-chain applications, the second uplink port can be used to cascade multiple switches.

The mode of operation can be configured using easily accessible DIP-switches or using Web, Telnet, SSH, SNMPv1/v2c/v3 or Serial Console management interfaces. IPv4 and IPv6 are supported on the switches. These management interfaces provide access to filtering and security options, such as, broadcast storm prevention, IGMP, IEEE 802.1x, RADIUS, TACACS+ and Access Control Lists. Email notification and alarm reporting is provided.

The Small Form Pluggable (SFP) transceiver receptacle ports support 10/100/1000BASE-T and 1000BASE-T copper transceivers and 100Mbps and 1000Mbps standard, CWDM and DWDM fiber transceivers in a variety of distances and fiber types.

The switch can be wall mounted, rack mounted using a shelf (8260-0) or DIN-rail mounted using the DIN-rail mounting clips (8251-0). The switch is available with an external 100 to 240V AC power adapter or with a DC terminal connector.

Dual Device Mode Application

This Dual Device feature is extremely useful when two isolated networks domains share a single network distribution location.

The example below depicts a scenario where a surveillance security (green) network and a Wi-Fi (purple) network are sharing a single hub distribution location. Using the two uplinks and the Dual Device mode facilitates using a single switch driving both the Cameras and the Wi-Fi Access Points across SPE cabling while maintaining isolation between the networks. In this scenario, no AC power is required at the far end. The OmniConverter GLPoE/M is sending power down the SPE cabling and powering the OmniConverter 10TPS/LPD. In turn, the OmniConverter 10TPS/LPD is powering the Cameras and Access Points.

Building Automation Application

This example shows a managed Building Automation application using an OmniConverter GLPoE/M and 10TPS/LPD modules to connect building systems back to a centralized control room. No external AC power is required since the 10TPS/LPD modules are powered by the GLPoE/M switch over the SPE cable and the building systems are powered be the 10TPS/LPD modules. Systems controlled by the OmniConverter modules include Motion Detection, Lighting, Elevator Control, Access Control to Floors, Security Surveillance and HVAC.

Step 3: Choose a Power Option (2930-x-4c-pt)

Step 4: Choose an Operating Temperature Option (2930-x-4c-pt)