iConverter® GX/T2
  • 10/100/1000BASE-T copper to 100/1000BASE-X fiber converter
  • Supports DF and SF 100BASE-FX or 1000BASE-X SFP transceivers for standard, CWDM or DWDM wavelengths
  • RJ-45 port supports 10/100/1000 and Half/Full-Duplex auto-negotiation and MDI/MDIX auto-crossover
  • 10,240 byte jumbo frames
  • Supports 802.1ad Q-in-Q, QoS, Port Access Control and MIB statistics
iConverter® XM5 Network Interface Device
  • Two 10/100/1000BASE-T RJ-45 ports and two 100/1000BASE-X SFP ports
  • Dual Channel converter (Dual Device Mode)
  • 4-port Gigabit Ethernet switch
  • Switch with 1:1 Uplink Protection
  • Fiber redundancy with less than 50ms switching
iConverter® 2GXT
  • MEF Carrier Ethernet 2.0 Certified 10 Gigabit and 1000Mbps Ethernet Aggregation NID
  • Integrated IPv4, IPv6, SNMPv1/v2c/v3, SSH, Telnet and IP-less 802.3ah OAM management
  • SNMP management via NetOutlook? Network Management software
  • Supports DF and SF SFP/SFP+/XFP transceivers for standard, CWDM or DWDM wavelengths
  • Advanced traffic management with service mapping, traffic policing and shaping with Hierarchical Rate Limiting
iConverter® 10GXT
  • 10/100/1000 copper to 1G/10G Fiber Media Converter
  • Supports 1G SFP, 10G SFP+ and 10G XFP transceivers
  • Supports DF and SF SFP/SFP+ and XFP transceivers for standard, CWDM or DWDM wavelengths
  • 10,056 byte jumbo frames
  • RJ-45 port supports 10/100/1000 and Half/Full-Duplex auto-negotiation and MDI/MDIX auto-crossover
iConverter® xFF Industrial Media Converter
  • Industrial SFP to SFP protocol-transparent fiber converter
  • Industrial operating temp range (-40 to 75?C)
  • Supports Ethernet, Fast Ethernet and Gigabit Ethernet
  • Supports S1T (OC-3/12/48) and SDH (STM-1/4/16)
  • Supports 1x/2x/4x/8x Fibre Channel
iConverter® GX/TM2 Industrial Media Converter
  • Carrier-Grade optical Ethernet Network Interface Device
  • Industrial operating temp range of -40? to 75? C
  • Integrated IPv4, SNMPv1/v2c/v3, Telnet and IP-less 802.3ah management
  • SNMP management via NetOutlook? software
  • Supports DF and SF Gigabit SFP transceivers for standard, CWDM or DWDM wavelengths
iConverter® 10/100M2 Industrial Media Converter
  • Industrial Carrier-Grade optical Ethernet Network Interface Device
  • Industrial operating temp range of -40? to 75?C
  • Integrated IPv4, SNMPv1/v2c/v3, Telnet and IP-less 802.3ah management
  • SNMP management via NetOutlook? software
  • Supports DF and SF 100BASE-X SFP transceivers for standard, CWDM or DWDM wavelengths
iConverter® XG+ Industrial Media Converter
  • Supports commercial (0 to 50?C), wide (-40 to 60?C) and industrial (-40 to 75?C) temp ranges
  • Protocol-transparent 9.8 Gbps to 11.32 Gbps fiber converter and transponder with ultra-low latency
  • Functions as a fiber mode converter, a CWDM or DWDM transponder, or a fiber repeater supporting the three Rs
  • Compatible with 10G Ethernet, 10G S1T/SDH, 10G Fibre Channel, 10G OTN (G.709) and 9.8 Gbps CPRI
  • Compliant with MSA SFF-8472 and INF-8077i standards
iConverter® 1-Module Passive Chassis
  • Compact unpowered 1-Module Passive Chassis
  • Supports single slot passive iConverter CWDM/DWDM Multiplexers and OADMs
  • Wall-mount or tabletop options for flexible installations
  • DIN-rail, 19? and 23? rack mounting options available
  • Made in the USA
iConverter® microNID
  • 100/1000BASE-T Copper and 100/1000BASE-X SFP Network Interface Device
  • SFP transceivers for standard, CWDM or DWDM wavelengths
  • Low-latency cut-through flow processing
  • Third party Tester interoperability with Auto Loop Up/ Down
  • IEEE 802.1ag End-to-End Fault Management (FM) - 3.3msec Continuity Check Messages (CCM)
SFP+ and XFP Transceivers
  • Omnitron SFP+ and XFP Transceivers enable flexible fiber and copper connectivity
  • Compliant with IEEE 802.3ae 10Gbps Ethernet specs
  • Supports 10G/5G/2.5G/1G/100Mbps data rates
  • Compliant with IEEE 802.3bz 2.5/5.0Gbps Multi-Gigabit/Multi-Rate Ethernet spec
  • Compatible with Omnitron?s 10G media converters, switches and Network Interface Devices that support SFP+ and XFP transceivers
SFP+ and XFP Transceivers for CWDM/DWDM Wavelengths
  • Omnitron Optical Transceivers enable flexible fiber and copper connectivity
  • Supports Coarse Wave Division Multiplexing optics
  • Supports Dense Wave Division Multiplexing (DWDM) optics
  • Compliant with MSA SFF-8472 standard, which provides interoperability with other network devices
  • Compatible with iConverter, OmniConverter and RuggedNet 10G media converter, switches and Network Interface Devices that support SFP+ and XFP transceivers
iConverter® XM5-1G Network Interface Device
  • MEF Carrier Ethernet 2.0 Certified 8-Port Gigabit NID
  • Integrated IPv4, IPv6, SNMPv1/v2c/v3, SSH, Telnet and IP-less 802.3ah OAM management
  • SNMP management via NetOutlook? Network Management software
  • Supports DF and SF SFP transceivers for standard, CWDM or DWDM wavelengths
  • Advanced traffic management with service mapping, traffic policing and shaping with Hierarchical Rate Limiting
iConverter® 1-Module Industrial Power Chassis
  • 1-Module Industrial Power Chassis
  • Single or dual DC power for redundancy
  • DC input supports 12 to 36VDC or 20 to 60VDC
  • Wall, Rack or DIN-rail mountable
  • Fan-less design for long life
Results 49 - 65 of 65