iConverter (77)

The iConverter platform consists of media converters, Network Interface Devices, CWDM and T1/E1 multiplexers and CWDM multiplexers available in standalone and chassis plug-in modules. The plug-in modules can be installed in any iConverter chassis equipped with other iConverter modules. This flexible architecture provides a multi-service platform capable of delivering Ethernet, TDM, SONET and other services across fiber links or combining services over a CWDM common fiber link. 

Learn More

T1 Media Converters and T3 Media Converters

 T1/E1 and T3/E3 fiber converters provide a reliable and cost-effective method to extend traditional TDM (Time Division Multiplexing) telecom protocols copper connections using fiber optic cabling. T3/E3 and T1/E1 converters operate in pairs to extend a TDM circuit from service provider demarcation point. 

T1/E1 and T3/E3 copper-to-fiber converters provide diagnostic features to aid in the installation and maintenance of the fiber links.

  • iConverter T3/E3
    iConverter T3/E3

    T3/E3 Managed Media Converter

    The iConverter T3/E3 media converter provides standard T3 (44.736Mbps) or E3 (34.368Mbps) coax to fiber conversion and can be used to connect to devices such as PBXs, multiplexers, routers and video servers via fiber. T3/E3 media converters operate in pairs, extending distances over fiber, which improves noise immunity, quality of service, intrusion protection and network security.


  • iConverter T1/E1
    iConverter T1/E1

    T1/E1 Managed Media Converter

    The iConverter T1/E1 media converter provides standard T1 (1.544Mbps) or E1 (2.048Mbps) copper-to-fiber conversion and can be used to extend the demarcation point between service provider and networking equipment. T1/E1 media converters operate in pairs, extending distances over fiber, which improves noise immunity, quality of service, intrusion protection and network security.



10/100/1000BASE-T to 100/1000BASE-X
2-Channel Ethernet Media Converter

iConverter 2GXT Ethernet fiber media converters are members of the modular iConverter Multi-Service Platform. The 2GXT is a dual-channel media converter and four-port switch with two 10/100/1000BASE-T RJ-45 ports and two Small Form Pluggable (SFP) ports. The dual SFP fiber ports can be configured to provide 1:1 uplink protection with less than 50ms switchover when the 2GXT is deployed as a four-port switch.

10/100/1000BASE-T UTP to 1000BASE-X or 100BASE-X Managed Ethernet VLAN Media Converter

The iConverter GX/T2 media converters are members of the modular iConverter Multi-Serivce Platform. The GX/T2 is a 10/100/1000BASE-T UTP to 100BASE-FX or 1000BASE-X fiber media converter that supports jumbo frames up to 10,240 bytes. The GX/T2 is used for conversion from a 10/100/1000 UTP to Fast Ethernet or Gigabit Ethernet fiber, and supports both 100BASE-FX and 1000BASE-X Small Form Pluggable (SFP) transceivers.

Carrier Ethernet 2.0 NIDs with Power over Ethernet

The iConverter® GM4 PoE Network Interface Devices (NID) deliver advanced Carrier Ethernet 2.0 services and provide integrated Power over Ethernet (PoE) at the demarcation. GM4 PoE NIDs function as PoE Power Sourcing Equipment in small cell (metro cell) and WiFi applications, where the radio equipment can be powered through the Ethernet UTP cables.

10GBASE-T Ethernet Media Converter

The iConverter XGT+ is a 10 Gigabit Ethernet media converter with one RJ-45 port and one pluggable transceiver port, that provides copper to fiber and copper to copper media conversion. Copper to fiber conversion is achieved with XFP or SFP+ fiber transceivers. XFP and SFP+ transceivers support multimode and single-mode fiber, and CWDM/DWDM wavelengths. 

1000BASE-X SFP to 1000BASE-X SFP Ethernet Media Converter and Network Interface Device

The iConverter 2GXM conforms to the Ethernet in the First Mile (EFM) standards to support Fiber-to-the-X Metropolitan and Enterprise LAN networks. The 2GXM provides intelligent, securely managed service demarcation at the customer premises, offering Quality of Service capabilities.

Page 2 of 6

Ask a Question

(*) Required field

1000 characters left