RuggedNet® 10G/Mi

Managed Industrial 6 and 10 Port 10Gigabit Ethernet Switch



Features


  • Managed Industrial 1/10G Ethernet Switch with single or dual DC power
  • Two 1/10G SFP/SFP+ transceiver uplink ports
  • Supports copper and fiber SFP transceivers
  • Supports speeds of 10M, 100M, 1G and 10Gbps copper SFP/SFP+ transceivers
  • Four or eight 10/100/1000 copper user ports
  • Supports jumbo frames up to 10,240 bytes
  • Management via Web, Telnet, SSH, SNMPv1/v2c/v3 and serial interfaces
  • SNMP management via Omnitron’s NetOutlook® management software, or third-party SNMP software
  • Email Notification with Simple Mail Transfer Protocol
  • IEEE 802.1x, RADIUS, TACACS+ and ACL
  • IEEE 802.1w Rapid Spanning Tree Protocol
  • IEC 62439-2 Industrial Ring Media Redundancy Protocol
  • IEEE 802.1ax LAG and LACP; Active/Active and Active/Standby
  • Dual Device mode for operating as two separate switches
  • Directed Switch mode to prevent port flooding
  • Alarm contacts and sensors
  • Wall, Rack and DIN-rail mountable
  • Fan-less design
  • Industrial (-40 to 75ºC) operating temperature
  • Made in the USA
  • Free 24/7/365 Technical Support

ADDITIONAL FEATURES

  • IEEE 802.1Q VLAN tagging and IEEE 802.1ad Q-in-Q Provider Bridge VLAN stacking
  • Port Access Control for enhanced security
  • Broadcast / Multicast / Unicast Storm Prevention
  • DHCP Relay Option 82
  • RFC 4541 Internet Group Management snooping
  • IEEE 802.1ab Link Layer Discovery Protocol
  • Rate Limiting, Queue prioritization and Class of Service
  • Static MAC configuration and blocking of unknown Unicast/Multicast addresses
  • SNTP / NTP and time of day
  • RFC 5424 Syslog




Description


The RuggedNet 10G/Mi is a ruggedized managed industrial Ethernet switch that features two 1/10G uplink ports and four or eight 10/100/1000 RJ-45 copper user ports. The RuggedNet 10G/Mi enables industrial network distance extension with fiber cabling.

The RuggedNet 10G/Mi is a Layer 2 Ethernet switch that forwards frames to any port based on their MAC address.

All models support Directed Switch mode, which directs multicast traffic (such as video) only to the appropriate uplink port, preventing multicast traffic from flooding other network ports.

The switches support redundant uplinks, industrial ring Media Redundancy Protocol (MRP), Spanning Tree protocol and daisy-chain configurations for high availability industrial network applications.

The switches support Dual Device mode that enables the 10G/Mi to operate as two independent and isolated Ethernet switches. In Dual Device mode, the 10G/Mi provides separate and independent data traffic paths between each uplink port and a group of user ports.

The mode of operation can be configured using easily accessible DIP-switches or using Web, Telnet, SSH, SNMPv1/v2c/v3 or Serial Console management interfaces. These management interfaces provide access to filtering and security options, such as, broadcast storm prevention, IGMP, IEEE 802.1x, RADIUS, TACACS+ and Access Control Lists. Email event notification and alarm reporting is provided using Simple Mail Transfer Protocol.

The RuggedNet switches are available with Small Form Pluggable (SFP) transceiver receptacle ports. The SFP ports support 10/100/1000BASE-T, 1000BASE-T and 10GBASE-T copper transceivers. They also support 1G and 10G multimode or single-mode fiber, dual or single-fiber and standard or CWDM wavelengths.

The RuggedNet compact industrial Ethernet switches can be wall or rack mounted using a wall mount bracket and shelf or DIN-rail mounted using the included DIN-rail mounting clip. They are available with single or dual DC input power options.





Examples


Dual Device Mode Application

This Dual Device feature is extremely useful when two isolated networks domains share a single network distribution location.

The example below depicts a scenario where the Quality Control (green) network and the Manufacturing (purple) network are sharing a single hub distribution location. Using the two uplinks and the Dual Switch mode facilitates using a single switch driving both the Quality Control and the Manufacturing devices while maintaining isolation between the networks.

Dual Media Converter Mode 2902 10 G Mi

Daisy-Chain and Ring Topology Network Application

This example demonstrates the daisy chaining and ring capabilities of the RuggedNet. In this application each RuggedNet switch connects to its neighboring switches via its uplink ports eventually closing the ring. The RuggedNet switches are providing connectivity between the workstations and the router.

Using this network architecture combined with ring protection protocols such as Media Redundancy Protocol (MRP) or Rapid Spanning Tree Protocol (RSTP) facilitates a highly resilient network required in mission critical applications.

Industrial Manufactring Application 2902 10 G Mi





Specifications


Description RuggedNet® 10G/Mi
10/100/1000BASE-T with 1/10G Uplink Ports
Ruggedized Managed 6 and 10 Port 10Gigabit Ethernet Switch
Standard Compliances

IEEE 802.3, IEEE 802.1Q, IEEE 802.1ad, IEEE 802.1ab, IEEE 802.1w, IEEE 802.1ax,

RFC 5424, RFC 4541, IEC 624339-2, SMTP, SNTP, RADIUS, TACACS+, IEEE 802.1x

Regulatory Compliances
(Pending)

Safety: UL 60950-1, UL-62368-1,

            IEC 60950-1:2005+A1:2009, IEC 62368:2014/A11:2017,

            EN 60950-1:2006+A11:2009+A1:2010+A12:2011 +A2:2013,

            CAN/CSA C22.2 No. 60950-1, CAN/CSA C22.2 No. 62368-1-14,

            CE Mark

EMC: EN 55032/EN 55024 CE Emissions/Immunity,

          IEC 61000-6-4 Industrial Emissions, IEC 61000-6-2 Industrial Immunity

EMI: CISPR 32, FCC 47 Part 15 Subpart B Class A

EMS: IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV, IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10V/m,

          IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV,IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV,

          IEC 61000-4-6 CS: Signal: 10 V, IEC 61000-4-8 ( Magnetic Field),

          IEC 61000-4-11 (General Immunity in Industrial Environments )

IP Rating: IP40 Protection   

Environmental REACH, RoHS and WEEE
Management Web, Telnet, SSHv2, Serial Console, SNMPv1/v2c/v3
Frame Size Up to 10,240 bytes
Port Types

Copper:      10/100/1000BASE-T (RJ-45)


SFP/SFP+: 10GBASE-X Fiber Transceivers

                    10GBASE-T Copper Transceivers

                    1000BASE-X Fiber Transceivers

                    1000BASE-T Copper Transceivers

                    10/100/1000BASE-T SGMII Copper Transceivers

Serial:          RJ-45

Cable Types

Copper: EIA/TIA 568A/B, Cat 5 UTP and higher


Fiber:    Multimode: 50/125, 62.5/125µm
             Single-mode: 9/125µm

Serial:  Category 3 and higher

DC Power Requirements 4 RJ-45 Ports:
+12 to +57VDC;
0.86A @ 12VDC
0.22A @ 48VDC
2 Pin Terminal (non-isolated)
8 RJ-45 Ports:
+12 to +57VDC;
0.94A @ 12VDC
0.24A @ 48VDC
2 Pin Terminal (non-isolated)
Dimensions (W x D x H) 1.5” x 5.5” x 5.5” (38.1 mm x 139.7 mm x 139.7 mm)
Weight 4 RJ-45 Ports:
1.70 lb. (772 grams)
8 RJ-45 Ports:
1.77 lb. (803 grams)
Operating Temperature Extended: -40 to 75°C
Storage: -40 to 80°C
Humidity 5% to 95% (non-condensing)
Altitude -100m to 4,000m (operational)
MTBF (hrs) 285,000
Warranty
5 year product warranty with 24/7/365 free Technical Support




Ordering


RuggedNet 10G/Mi Models
Model NumberDescription
2902-0-24-pZ RuggedNet 10G/Mi 2 x SFP/SFP+ uplink port and 4 x RJ-45 user ports Extended Temperature
2902-0-28-pZ RuggedNet 10G/Mi 2 x SFP/SFP+ uplink port and 8 x RJ-45 user ports Extended Temperature
Power Options (p):
1 = Single DC 2-Pin Terminal Connector 2 = Dual DC 2-Pin Terminal Connectors
Contact Omnitron for other fiber options. Order the appropriate SFPs separately. Visit the Omnitron Optical Transceivers web page. web page.

 

Accessories
Model NumberDescription Wall Mount Plate 
 8260-3  Wall Mounting Plate
 8260-0  19" rack mount shelf