|  |
OmniConverter PoE SE SFP RJ-45
Lifetime Warranty

Cost-Effective 10/100/1000 Media Converter with Power over Ethernet (PoE or PoE+)

OmniConverter® GPoE+/SE

Part Number: 9499N-0-18W

Add to Quote
icons
  • Description
  • Specifications
  • Documents

OmniConverter® GPoE+/SE : 1 x 10/100/1000 Mbps RJ-45 PoE+ to 1 Gbps Fiber, 1 x SFP, JPN 100-100-240VAC AC/DC Power Adapter, Wide Temperature -40 to 60 deg

Specifications

Description
OmniConverter GPoE+/SE
10/100/1000BASE-T to 1000BASE-X
Fiber Media Converter with PoE+
Standard Compliances

IEEE 802.3,

IEEE 802.3af (15.40 watts max), IEEE 802.3at (30 watts max)
Regulatory Compliances
(Pending)

Safety: UL 62368-1, UL 60950-1,

            IEC 62368-1, IEC 60950-1,

            EN 62368-1, EN 60950-1,

            CAN/CSA C22.2 No. 62368-1-14, CAN/CSA C22.2 No. 60950-1,

            CE Mark, UKCA

EMC:   EN 55032/24 CE Emissions/Immunity,

            IEC 61000-6-4 Industrial Emissions,

            IEC 61000-6-2 Industrial Immunity

EMI:     CISPR 32, FCC 47 Part 15 Subpart B Class A

EMS:    IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV,

            IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m,

            IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV (DC models),

            IEC 61000-4-4 EFT: Power: 1 kV; Signal: 1 kV (AC models),

            IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV (DC models),

            IEC 61000-4-5 Surge: Power: 1 kV Line/Line; 2 kV Line/Gnd; Signal: 2 kV (AC models),

            IEC 61000-4-6 CS: Signal: 10 V,

            IEC 61000-4-8 (Magnetic Field) 30A/m,

            IEC 61000-4-11 (Voltage Dips, interrupts)

IP Rating: IP30D Protection

ACT: TAA, BAA,NDAA
Environmental
RoHS, WEEE, REACH
PoE Power Modes
IEEE Alterative A (Alt A)
Frame Size
Up to 10,240 bytes
Port Types:

Copper: 10/100/1000BASE-T (RJ-45)

Fiber:     1000BASE-X (SFP)
Cable Types

Copper: EIA/TIA 568A/B, Cat 5 UTP and higher

Fiber:     Multimode: 50/125, 62.5/125µm

              Single-mode: 9/125µm
AC Power Requirements
(Models with AC/DC Adapters)

100 - 240VAC/50 to 60Hz

0.31A @ 120VAC (typical)
DC Power Requirements
(Models with DC Terminals)

+/-46 to +/-57VDC;

0.59A @ 56VDC

2 Pin Terminal (isolated)
A minimum of 50VDC is required to guarantee 25.5 watts at 100 meters on Cat 5 cable or better.
Dimensions (W x D x H) 3.8” x 4.8” x 1.0” (96.5 mm x 121.9 mm x 25.4 mm)
Weight

Module Only: 1.0 lbs.; 453.6 grams

Module w/ Adapter: 1.8 lbs.; 816.4grams
Operating Temperature
(See Temperature Derating Table)

Commercial: 0 to 50°C

Wide:         -40 to 60°C (-20°C AC cold start)

Storage:     -40 to 80°C
Humidity 5 to 95% (non-condensing)
Altitude -100m to 4,000m
MTBF (hours)

Module Only: 681,000

AC/DC Adapter: 100,000
Warranty Lifetime warranty with 24/7/365 free Technical Support

 

 

 Power / Voltage Requirements and Specifications per IEEE 

 
Description IEEE 802.3af PoE IEEE 802.3at PoE+
Power Supply Voltage Range 46.0 to 57.0 VDC 51.0 to 57.0 VDC
Voltage Range at PSE port Output 44.0 to 56.0 VDC 50.0 to 56.0 VDC
Maximum Power from PoE/PSE port 15.4 watts 30 watts
Minimum Voltage at PoE/PD port input* 37.0 VDC 42.5 VDC
Minimum Power at PoE/PD port* 12.95 watts 25.5 watts

OmniConverter GPoE+/SE (Data Sheet)

OmniConverter GPoE+/SE (User Manual)

Media Converter Comparison App Note (The Application Note provides a cross reference from the Previous/Old models to the Enhanced models)

© 2026 Omnitron Systems Technology, Inc. All Rights Reserved.