10/100 Media Converter with Power over Ethernet (PoE / PoE+)

OmniConverter® FPoE+/S

OmniConverter PoE SCSF 1 RJ-45
Lifetime Warranty
OmniConverter® FPoE+/S: 10/100 Mbps RJ-45 to 10/100 Mbps RJ-45 to 100 Mbps Fiber, SC, Multimode Single Fiber, 1550nm / 1310nm, 5km, 100-240VAC Universal Power Adapter (no country specific cord), Commercial Temperature 0 to 50 deg C


Part Number

9331N-0-12

icons

  • Description
  • Specifications
  • Documents

OmniConverter FPoE+/S (Data Sheet)

OmniConverter FPoE+/S (User Manual)

Media Converter Comparison App Note (The Application Note provides a cross reference from the Previous/Old models to the Enhanced models)

OmniConverter® FPoE+/S: 10/100 Mbps RJ-45 to 10/100 Mbps RJ-45 to 100 Mbps Fiber, SC, Multimode Single Fiber, 1550nm / 1310nm, 5km, 100-240VAC Universal Power Adapter (no country specific cord), Commercial Temperature 0 to 50 deg C

Specifications

Description OmniConverter FPoE+/S
10/100BASE-T to 100BASE-X Fiber Media Converter with PoE+
Standard Compliances

IEEE 802.3,

IEEE 802.3af (15.40 watts), IEEE 802.3at (30 watts)

Regulatory Compliances

(Pending)

Safety:  UL 62368-1, UL 60950-1,

             IEC 62368-1, IEC 60950-1,

              EN 62368-1, EN 60950-1,

             CAN/CSA C22.2 No. 62368-1-14, CAN/CSA C22.2 No. 60950-1,

             CE Mark,

             UKCA

EMC:    EN 55032/24 CE Emissions/Immunity,

             IEC 61000-6-4 Industrial Emissions,

             IEC 61000-6-2 Industrial Immunity

EMI:    CISPR 32,

            FCC 47 Part 15 Subpart B Class A

EMS:   IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV,

            IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m,

            IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV (DC models),

            IEC 61000-4-4 EFT: Power: 1 kV; Signal: 1 kV (AC models),

            IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV (DC models),

            IEC 61000-4-5 Surge: Power: 1 kV Line/Line; 2 kV Line/Gnd; Signal: 2 kV (AC models),

            IEC 61000-4-6 CS: Signal: 10 V,

            IEC 61000-4-8 (Magnetic Field) 30A/m,

            IEC 61000-4-11 (Voltage Dips, interrupts)

IP Rating: IP30D Protection

ACT: TAA, BAA,NDAA
Environmental REACH, RoHS and WEEE
PoE Power Modes IEEE Alterative A (Alt A)
Frame Size Up to 10,240 bytes
Port Types

Copper: 10/100BASE-T (RJ-45)

Fiber:    100BASE-X (ST, SC, SFP)
Cable Types

Copper: EIA/TIA 568A/B, Cat 5 UTP and higher

Fiber:     Multimode: 50/125, 62.5/125µm

              Single-mode: 9/125µm
AC Power Requirements
(Models with AC/DC Adapters)

1 RJ-45 Port:

100 - 240VAC/50 to 60Hz, 0.33A @ 120VAC (typical)

2 RJ-45 Ports:

100 - 240VAC/50 - 60Hz, 0.62A @ 120VAC (typical)
DC Power Requirements
(Models with DC Terminals)

1 RJ-45 Port:

+/-46 to +/-57VDC,

0.78A @ 56VDC

2 Pin Terminal (isolated)

2 RJ-45 Ports:

+/-46 to +/-57VDC,

1.45A @ 56VDC

2 Pin Terminal (isolated)
A minimum DC input voltage of 50VDC is required to guarantee 25.5 watts (802.3at) at the end of 100 meters of Cat 5 or better
Dimensions (W x D X H) 3.8” x 4.8” x 1.0” (96.5 mm x 121.9 mm x 25.4 mm)
Weight

Module Only: 1.0 lbs. (453.6 grams)

Module w/ Adapter: 1.9 lbs. (852.6 grams)
Operating Temperature
(See Temperature Derating Table)
Commercial:  0 to 50°C
Wide:          -40 to 60°C (-20°C AC cold start)
Extended:   -40 to 75°C (-20°C AC cold start)
Storage:      -40 to 80°C
Humidity 5 to 95% (non-condensing)
Altitude -100m to 4,000m
MTBF (hrs) Module: 584,000
AC/DC Adapter: 100,000
Warranty Lifetime warranty with 24/7/365 free Technical Support
 
 
 

Power / Voltage Requirements and Specifications per IEEE 

Description IEEE 802.3af PoE IEEE 802.3at PoE+
Power Supply Voltage Range 46.0 to 57.0 VDC 51.0 to 57.0 VDC
Voltage Range at PSE port Output 44.0 to 56.0 VDC 50.0 to 56.0 VDC
Maximum Power from PoE/PSE port 15.4 watts 30 watts
Minimum Voltage at PoE/PD port input* 37.0 VDC 42.5 VDC
Minimum Power at PoE/PD port* 12.95 watts 25.5 watts