| |

Unmanaged 10BASE-T1L Ethernet-APL Interoperable PSE Industrial

RuggedNet® GLAPS/Si

Part Number: 2949-0-42-2Z

–

Add to Quote

Description
Specifications
Documents

RuggedNet GLAPS/Si Unmanaged, 2xSFP(100/1G) Up link + 4 x 10BASE-T1L IEC 63171-2 SPE Jack Ports, 2.4V, Class 3 , Direct DC input, +46 to +50VDC, Extended Temp -40° to 75°C

Specifications

Description		RuggedNet® GLAPS/Si 10T/T1L to 100/1000 Fiber or 10/100/1000 Copper Uplinks Unmanaged Industrial PSE Ethernet Switch
Base Model Number		2954	2945	2955	2947	2949	2951
Standard Compliances		IEEE 802.3, 10BASE-T1L compliant
Regulatory Compliances (Pending)		Safety: UL 62368-1, UL 60950-1, IEC 62368-1, IEC 60950-1, CUL CSA C22.2 No. 60950, EN 60950-1:2006 CE Mark, UKCA EMI: FCC 47CFR, Part 15 Class A AS/NZS 3548, AS/NZS 4417.1 and AS/NZS 4417.2 ICES-003 Issue 3 EN 55032/CISPR 22 and EN55035 EN61000-3-2 VCCI V3/2001.04 (CISPR 22A:1997, Class A) EMC: IEC/EN61000-4-2, IEC/EN61000-4-3 IEC/EN61000-4-4, IEC/EN61000-4-5 IEC/EN61000-4-6, IEC/EN61000-4-8 IEC/EN61000-4-11 ACT: TAA, BAA, NDAA
Environmental		REACH, RoHS and WEEE
Frame Size		Up to 2,048 bytes
Port Types	10BASE-T1L:	3-Pin Terminal or IEC 63171 Connector Model 2954 Class A edge/field device: 24 to 48 VDC 1.0 V peak-to-peak; 0.5 W Model 2945 Class A edge/field device: 12 to 15 VDC 1.0 V peak-to-peak; 0.5 W		3-Pin Terminal or IEC 63171 Connector Model 2955 Class C edge/field device: 24 to 48 VDC 1.0 V peak-to-peak; 1.0 W Model 2947 Class C edge/field device: 12 to 15 VDC 1.0 V peak-to-peak; 1.0 W		3-Pin Terminal or IEC 63171 Connector Class 3 edge/field device: 46 to 50 VDC 2.4 V peak-to-peak, 36 W	3-Pin Terminal or IEC 63171 Connector Class 4 edge/field device: 46 to 50 VDC 2.4 V peak-to-peak, 92 W
Port Types	Uplink:	RJ-45: 10/100/1000BASE-T SFP: 100BASE-X and 1000BASE-X Fiber Transceivers, 1000BASE-T Copper Transceivers 10/100/1000BASE-T SGMII Copper Transceivers
Cable Types	10BASE-T1L: RJ-45 Copper: Fiber:	Single-Pair Ethernet (SPE) cable, IEC 61156-13 (fixed) or IEC 61156-14 (flexible) 18AWG cable or better EIA/TIA 568A/B, Cat 3 UTP and higher Multimode: 50/125, 62.5/125μm Single-mode: 9/125μm
DC Power Requirements (with DC Terminals)		+24 to +48VDC; 0.36A @ 48VDC 2 Pin Terminal	+12 to +15VDC; 0.78A @ 12VDC 2 Pin Terminal	+24 to +48VDC; 0.52A @ 48VDC 2 Pin Terminal	+12 to +15VDC; 0.94A @ 12VDC 2 Pin Terminal	+46 to +50VDC; 5.16A @ 48VDC 2 Pin Terminal	+46 to +50VDC; 8.20A @ 48VDC 2 Pin Terminal
Dimensions (W x D x H)		1.5” x 5.5” x 5.5” (38.1 mm x 139.7 mm x 139.7 mm)
Weight		1.70 lb. (772 grams)
Operating Temperature		Extended: -40 to 75°C Storage: -40 to 80°C
Humidity		5 to 95% (non-condensing)
Altitude		-100m to 4,000m (operational)
MTBF (hours)		224,000	224,000	224,000	224,000	215,000	215,000
Warranty		5 year warranty with 24/7/365 free Technical Support

Hazardous Area Use Disclaimer:
This product is not certified for use in hazardous (classified) locations, including Zone 0, Zone 1, or Zone 2 as defined by IEC 60079-10-1 or equivalent national standards.
It is intended for installation in non-hazardous (safe) areas only.
The product supports interoperability with Ethernet-APL networks and devices, including those installed in hazardous zones, provided that all connections are made through
certified intrinsically safe interfaces as part of a compliant system architecture.
When connecting to devices located in hazardous areas, appropriate energy-limiting devices, field switches, or barriers must be used to ensure compliance with all applicable
safety standards.

RuggedNet GLAPS/Si Single Pair Ethernet Switch (User Manual)

RuggedNet GLAPS/Si Single Pair Ethernet Switch (Data Sheet)

Privacy & Cookie Policy