OmniConverter® 10G/S

Multi-Gigabit/Multi-Rate 10M, 100M, 1G, 2.5G, 5G, 10G Media Converters

Features
Description
Examples
Specifications
Ordering
Documents

Features

Unmanaged 10G multi-gigabit/multi-rate media converters
One 1/10G SFP/SFP+ standard/CWDM/DWDM transceiver uplink port
Supports copper and fiber SFP/SFP+ transceivers
RJ-45 user ports support 10M, 100M, 1G, 2.5G, 5G and 10G
Supports jumbo frames up to 10,240 bytes
Multiple port configurations:
- 2 Port Device: 1 SFP/SFP+ + 1 RJ-45
- 3 Port Device: 1 SFP/SFP+ + 2 RJ-45
Available with AC to DC power adapter or DC terminal block
Integrated wall mount brackets
Wall, Rack and DIN-rail mountable
Commercial (0º to 50ºC) and wide (-40º to 60ºC) operating temperature ranges
Made in the USA
Lifetime warranty and free 24/7/365 Technical Support

Description

The OmniConverter 10G/S are unmanaged 10G Ethernet media converters featuring one 1/10G SFP/SFP+ uplink port and one or two multi-gigabit/multi-rate RJ-45 user ports.

The RJ-45 user ports support multi-gigabit/multi-rate speeds of 10Mbps, 100Mbps, 1Gbps, 2.5Gbps, 5Gbps and 10Gbps, supporting frame sizes up to 10,240 bytes.

The 10G/S are well suited for the bandwidth demands imposed by IP cameras, access points and small cell devices on the market today.

The 10G/S feature a Small Form Pluggable (SFP) transceiver receptacle port supporting a variety of copper and fiber transceivers. It supports 10/100/1000BASE-T, 1000BASE-T, 2.5BASE-T, 5GBASE-T and 10GBASE-T copper transceivers and 1G and 10G multimode or single-mode fiber, dual or single-fiber transceivers in standard, CWDM and DWDM wavelengths.

The compact OmniConverter media converters can be tabletop mounted, wall mounted, or DIN-rail mounted using an optional DIN-rail mounting clip (8251-0). They can also be mounted on a 1U 19” rack-mount shelf. They are available with DC input power via terminal connectors or external 100 to 240VAC power adapter.

Examples

Work Group Application

In this combined application, each OmniConverter 10G/S media converter connects to an iConverter® XM5 10G fiber switch. The OmniConverter media converters are providing high speed connectivity to small cell devices that require up to 10Gbps of bandwidth and IP surveillance cameras and Wi-Fi 6/6E Access Points. All devices are located near an AC power source.

Specifications

Description	OmniConverter 10G/S Multi-gigabit/multi-rate copper to 1/10G SFP Media Converter
Standard Compliances	IEEE 802.3, 802.3bz
Regulatory Compliances	Safety: UL 62368-1, UL 60950-1, IEC 62368-1, IEC 60950-1, EN 62368-1, EN 60950-1, CAN/CSA C22.2 No. 62368-1-14, CAN/CSA C22.2 No. 60950-1, CE Mark, UKCA EMC: EN 55032/24 CE Emissions/Immunity, UKCA EMI: CISPR 32, FCC 47 Part 15 Subpart B Class A EMS: IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV, IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m, IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV (DC models), IEC 61000-4-4 EFT: Power: 1 kV; Signal: 1 kV (AC models), IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV (DC models), IEC 61000-4-5 Surge: Power: 1 kV Line/Line; 2 kV Line/Gnd; Signal: 2 kV (AC models), IEC 61000-4-6 CS: Signal: 3 Vrms, IEC 61000-4-8 ( Magnetic Field) 30 A/m, IEC 61000-4-11 (Voltage Dips, interrupts) IP Rating: IP20 Protection
Environmental	RoHS, WEEE, REACH
Frame Size	Up to 10,240 bytes
Port Types	Copper: 10/100/1000BASE-T, 2.5GBASE-T/5GBASE-T/10GBASE-T (RJ-45) SFP/SFP+: 10GBASE-X Fiber Transceivers, 10GBASE-T Copper Transceivers 1000BASE-X Fiber Transceivers, 1000BASE-T Copper Transceivers 10/100/1000BASE-T SGMII Copper Transceivers 10/100/1000/2.5G/5G/10GBASE-T Multi-rate Copper Transceivers
Cable Types	Copper: Twisted-pair cable up to 100 meters 10BASE-T: 4-pair UTP Cat 3, 4, 5, 5e, 6, 6A 100BASE-TX: 4-pair UTP Cat 5, 5e, 6, 6A 1G/2.5G: 4-pair UTP Cat 5e, 6, 6A, 7 5G: 4-pair UTP Cat 6, 6A, 7 10G: 4-pair UTP Cat 6A, 7 Fiber: Multimode: 50/125, 62.5/125µm Single-mode: 9/125µm
AC Power Requirements (Models with AC/DC Adapters)	1 RJ-45 Port 100 - 240VAC/50 - 60Hz; 0.1A @ 120VAC (typical) 2.5 mm Barrel Connector	2 RJ-45 Ports 100 - 240VAC/50 - 60Hz; 0.14A @ 120VAC (typical) 2.5 mm Barrel Connector
DC Power Requirements (Models with DC Terminals)	1 RJ-45 Port +12 to +57VDC; 0.19A @ 56VDC 2 Pin Terminal	2 RJ-45 Ports +12 to +57VDC; 0.25A @ 56VDC 2 Pin Terminal
Dimensions W x D x H	4.8” x 6.0” x 1.75” (121.92 mm x 152.4 mm x 44.45 mm)
Weight	Module Only: 1.1 lbs. (498.9 grams) Module w/ Adapter: 1.6 lbs. (725.7 grams)
Operating Temperature	Commercial: 0 to 50°C Wide: -40 to 60°C (-20°C AC cold start) Storage: -40 to 80°C
Humidity	5% to 95% (non-condensing)
Altitude	-100m to 4,000m
MTBF (hrs)	Module Only: 271,000 AC/DC Adapter: 100,000
Warranty	Lifetime warranty with registration and 24/7/365 free Technical Support
* Pending

Ordering

OmniConverter 10G/S Models
Model Number	Description
9190-0-11-pt	OmniConverter 10G/S 1 x SFP/SFP+ uplink port and 1 x RJ-45 user ports
9190-0-12-pt	OmniConverter 10G/S 1 x SFP/SFP+ uplink port and 2 x RJ-45 user ports
Power Options (p):
1 = External AC/DC Adapter, 100 - 240 VAC included, with US Power Cord	8 = External AC/DC Adapter, 100 - 240 VAC included, with Japanese Power Cord
2 = External AC/DC Adapter, 100 - 240 VAC included, No Power Cord	9 = Direct DC 2 pin terminal connector, no AC/DC power adapter
Operating Temperature Options (t):
<leave blank> = Commercial temperature (0 to 50°C)	W = Wide temperature (-40 to 60°C)
Contact Omnitron for other fiber options. Order the appropriate SFPs separately. Visit the Optical Transceivers web page.

Accessories
Model Number	Description
8251-0	DIN Rail Mounting Clip
8260-0	19” 1U Rack Mount Shelf (up to 3 converters)

Documents

pdf OmniConverter 10G/S (Data Sheet) (790 KB)

pdf OmniConverter 10G/S (User Manual) (988 KB)

Need Help?