Deployed in military, manufacturing and gaming networks worldwide, Omnitron serial to fiber media converters extend serial RS-232, RS-422, RS-485, RS-530 and X.21 network links over fiber up to 120 km.

• Wide (-40 to 60°C) and Extended (-40 to 75°C) operating temperature ranges
• SFP, SFP+, XFP transceivers and fixed fiber connector options
• DTE/DCE switch for easy connection to most serial equipment
• Hardware flow control via RTS, CTS, DCD, DTR and DSR
• Modular architecture of converters and chassis for flexible and scalable deployments

Omnitron T1 converters extend TDM circuits from demarcation points to locations up to 120 km. Chassis-based and standalone modules support loop-back and testing modes for easy installation and trouble shooting.

• Extend T1 distances from service provider demarcation points
• Managed and unmanaged copper T1 to fiber conversion
• Distribute multiple fiber links from T1 equipment

Key Features

Omnitron T1/E1 media converters provide standard T1 (1.544Mbps) or E1 (2.048Mbps) copper-to-fiber conversion and can be used to extend the demarcation point between service provider and networking equipment.

• Wide (-40 to 60ºC) and Extended (-40 to 75ºC) operating temperature ranges
• Supports AMI, B8ZS and HDB3 line codes
• Features a crossover switch for easy connections to PBXs or CSUs
• Local and remote fiber loopback switches with optional all 1s insertion (AIS) to facilitate easy installation
• Modular architecture of converters and chassis for flexible and scalable deployments
• SFP, SFP+, XFP transceivers and fixed fiber connector options
• Available with advanced Ethernet networking features including VLAN, QoS and Bandwidth Control

Block

How can we help you?

Resource Center

Blogs, Videos, Data Sheets, User Manuals, Visio Stencils, Free BICSI CECs

Free Network Design

Schedule a session to review your network design with an Omnitron product specialist

Request a Quote

Looking for Pricing and Availability? Submit your RFQ’s and questions here

Product Selector

Find the exact Omnitron product for your network with intuitive filters

Omnitron Copper UTP to Fiber media converters enable seamless integration of different network cabling for Ethernet, T1, T3 and Serial.

• Extend network distances by converting copper to fiber
• Distribute multiple fiber links from copper switch equipment
• Convert multimode to single-mode fiber
• Convert copper or standard wavelength fiber to CWDM wavelengths

Key Features

Omnitron managed and Copper to Fiber media converters enable fiber connectivity to deliver more applications and bandwidth, while preserving investments in existing network equipment.

• Wide (-40 to 60°C) and Extended (-40 to 75°C) operating temperature ranges
• Modular architecture of converters and chassis for flexible and scalable deployments
• Supports a wide variety of protocols, data rates and media types
• SFP, SFP+, XFP transceivers and fixed fiber connector options
• Several AC, DC, Power over Ethernet and USB powering options
• Available with advanced Ethernet networking features including VLAN, QoS and Bandwidth Control

Coarse Wavelength Division Multiplexing (CWDM) is a proven and cost-effective solution to deliver new applications, more bandwidth and more services over existing fiber networks. Omnitron’s iConverter CWDM MUXes and OADMs multiplex and demultiplex multiple wavelengths (data channels) to expand the capacity of fiber network links.

• Transport up to 16 data channels with different data rates and protocols across a fiber link
• Each channel can support a data rate of up to 10 Gigabits
• Achieve high-density port configurations with iConverter chassis

	iConverter CWDM/X Multiplexer/Demultiplexer iConverter CWDM/X modules are available in 4 and 8-Channel models, supporting a variety of wavelength combinations and port configurations. The Single-Fiber iConverter CWDM/X modules are available in 2 and 4-Channel models.
	iConverter CWDM/AD Add/Drop Multiplexer iConverter CWDM/AD 1-Channel and 2-Channel modules add (multiplex) and drop (demultiplex) selected channels in one or both directions of a CWDM fiber route. A 1-Channel Single Fiber iConverter CWDM/AD module is also available.
	iConverter Multi-Service Platform iConverter CWDM Multiplexer modules are part of the iConverter Multi-Service Platform of managed media converters, Network Interface Devices and T1 multiplexers that supports a variety of data rates and network protocols, advanced switching features and SNMP management.