ada9a09acea936d776a6f55c82778c43 XL
iConverter® T1/E1 MUX/M
  • Multiplexes up to 16 independent T1 or E1 copper circuits onto 1 fiber link
  • 10/100/1000 copper Ethernet service multiplexed with T1/E1 circuits
  • 1000Mbps fixed fiber transceiver or SFP, in standard and CWDM/DWDM wavelengths
  • Supports MM, SM DF and SM SF
  • Supports AMI, B8ZS and HDB3 line codes
9caa2793658f3cc387f216157300b1ce XL
iConverter® Modular T1/E1 Multiplexer
  • Modular system multiplexes up to 16 T1/E1 circuits and 10/100/1000 Ethernet over fiber or EVC
  • Multiple groups of mux modules can be installed in the same chassis
  • Optional connectivity to adjacent Ethernet switch modules
  • Management via local serial port, Telnet or SNMP
  • SNMP management via NetOutlook? provides real-time module status, configuration and trap notification
01f1a05053c6242fcfa23075e5b963c1 XL
iConverter® NMM2
  • Real-time management, trap notification and remote configuration
  • Supports SNMPv1, SNMPv2c, SNMPv3, Telnet and FTP protocols
  • Password protected to prevent unauthorized access
  • Utilizes IEEE 802.3ah OAM extensions providing OAM IP-Less management
  • SNMP management via NetOutlook? management software, or third-party SNMP management software
1c0ae2205709722b62e843abc0471a55 XL
iConverter® 19-Module Chassis
  • The high-density iConverter 19-Module Chassis is 2U high and supports 19-inch or 23-inch rack mounts
  • Up to three hot-swappable AC, 24VDC and 48VDC power supplies for mission-critical networks
  • NEBS Level 3 Certification
  • Ethernet Backplane allows modules to share data to support a wide variety of network applications
  • Fiber Cable Management Tray available for high-density CWDM deployments
  • All iConverter modules are hot-swappable when used with the 19-Module Chassis
  • Management is available with the addition of a management module to the chassis
  • SNMP management via NetOutlook? provides real-time port and module status information, remote parameter configuration and trap notification
  • Commercial (0 to +50? C), wide (-40 to +60? C) and extended (-40 to +75? C) temp ranges
  • TAA, BAA and NDAA compliant, and Made in the USA
  • Lifetime Warranty and free 24/7 Technical Support
fa55c8bad0e242eb7986dc1135b50adb XL
iConverter® 5-Module Chassis
  • The iConverter 5-Module Chassis is 1U (1.75 inch) high and supports 19-inch or 23-inch rack mounts
  • Redundant, hot-swappable AC, 24VDC and 48VDC power supplies for mission critical networks
  • NEBS Level 3 Compliant
  • Ethernet backplane allows modules to share data and support a wide variety of network applications
  • Fiber Cable Management Tray available for high-density CWDM deployments
  • All iConverter modules are hot-swappable when used with the 5-Module Chassis
  • Management is available with the addition of a management module to the chassis
  • SNMP management via NetOutlook? provides real-time port and module status information, remote parameter configuration and trap notification
  • Commercial (0 to +50? C), wide (-40 to +60? C) and extended (-40 to +75? C) temp ranges
  • TAA, BAA and NDAA compliant, and Made in the USA
  • Lifetime Warranty and free 24/7 Technical Support
867519228d1d5325856fc61d710ded0e XL
iConverter® 2-Module Power Chassis
  • 2-Module chassis feature an internal AC or DC power supply
  • Houses all models of hot-swappable iConverter media converter and switch modules
  • NEBS Level 3 Certification
  • Ethernet backplane ports for connectivity to installed modules to support a wide variety of configurations
  • Wall-mount or tabletop options for flexible installations
  • Management is available with the addition of a management module to the chassis
  • SNMP management via NetOutlook? provides real-time port and module status information, remote parameter configuration and trap notification
  • Commercial (0 to +50? C), wide (-40 to +60? C) and extended (-40 to +75? C) temp ranges
  • TAA, BAA and NDAA compliant, and Made in the USA
  • Lifetime Warranty and free 24/7 Technical Support
f7a0a54c92471ac4480e727e4ccf93df XL
iConverter® 1-Module Chassis
  • 1-Module Power Chassis with external AC adapter power supply or direct DC power
  • DC input supports 20 to 60VDC via three pin terminal connector with isolated ground
  • NEBS Level 3 Compliant
  • Houses all single-slot models of hot-swappable iConverter media converter and switch modules
  • Models 8241-X and 8243-X support Dying Gasp (Power Loss Trap) when used with a Network Interface Device
  • Wall-mount or tabletop options for flexible installations
  • DIN-rail and 19? rack mounting options available
  • Management is available with the addition of a Network Interface Device (NID) in the chassis
  • SNMP management via NetOutlook? provides real-time port and module status information, remote parameter configuration and trap notification
  • Commercial (0 to +50? C) and wide (-40 to +60? C) temp ranges
  • TAA,BAA and NDAA compliant, and Made in the USA
  • Lifetime Warranty and free 24/7 Technical Support
f710044bf79a4b1f5d8b085e5e5d9711 XL
iConverter® 1-Module Redundant Power Chassis
  • 1-Module iConverter Redundant Power Chassis with dual redundant power source options
  • Supports the following Power Options:
    • Power-over-Ethernet (IEEE 802.3af PoE/PD)
    • Low Voltage DC Power 9-24VDC (terminal or universal AC/DC adapter available)
    • High Voltage DC Power 24-60VDC
  • Two (2) optional 10/100 Ethernet ports
  • 4 (4) optional contact closure alarm sensors
  • Features Dying Gasp Trap support
  • Managed via an installed iConverter Media Converter with Integrated Management (such as a 10/100M2)
  • Management supports Monitoring, Remote Configuration and Trap Notification
  • Commercial (0 to +50? C) and wide (-40 to +60? C) temp ranges
  • TAA, BAA and NDAA compliant, and Made in the USA
  • Lifetime Warranty and free 24/7 Technical Support
9ecd376e5371efaef9aad9bc9143aed8 XL
iConverter® 1U Rack-Mount Shelf
39eee751af30032eeece2f48de2de4ba XL
iConverter® 10FL/T
  • 10BASE-T copper to 10BASE-FL fiber converter
  • Supports MM, SM DF with ST, SC and LC connectors, and SM SF with SC connectors
  • RJ-45 port automatically supports Half or Full-Duplex 10Mbps Ethernet
  • UTP crossover switch eliminates the need for a crossover cable
  • User-selectable link fault detection modes facilitate quick fault detection, isolation and reporting
36fdb1a35cd2f54f95cf2119fb5bc7ed XL
iConverter® 10T/2
  • 10BASE-T copper to 10BASE-2 coax converter
  • Seamlessly connects 10BASE-T hubs via coax and coax network segments to 10BASE-T hubs
  • Supports 50 ohm coax to a maximum distance of 185m and 30 stations
  • Features a UTP crossover switch and automatic polarity detection and correction
  • Features switch-selectable coax line termination for convenience, space and cost saving
c99e3db826c0f4cc2688a36ce3b60e1a XL
iConverter® 100Fx/Tx
  • 100BASE-TX copper to 100BASE-X fiber converter
  • Supports MM, SM DF with ST, SC and LC connectors, and SM SF with SC connectors
  • RJ-45 port supports Half or Full-Duplex 100Mbps Ethernet
  • UTP crossover switch eliminates the need for a crossover cable
  • User-selectable link fault detection modes facilitate quick fault detection, isolation and reporting
ccb4e23c8aa216f1e96d31ab209c036b XL
iConverter® 10/100
  • 10BASE-T or 100BASE-TX copper to Fast Ethernet fiber converter
  • Supports MM, SM DF with ST, SC and LC connectors, and SM SF with SC connectors
  • RJ-45 port supports 10/100 Half and Full-Duplex auto/ manual configuration via DIP-switches and manual crossover switch
  • User-selectable link fault detection modes facilitate quick fault detection, isolation and reporting
  • LED displays for immediate visual status of each port
6f43b5263fbba79c5962514b85d34738 XL
iConverter® Tx/2Fx and Tx/2Tx
  • Provide hot backup with 100 microseconds link redundancy for critical applications
  • Tx/2Fx model provides 100BASE-TX copper to two 100BASE-FX fiber links
  • Tx/2Tx models provide 100BASE-TX copper to two 100BASE-TX copper links
  • Fiber modules support MM, SM DF with ST, SC and LC connectors, and SM SF with SC connectors
  • RJ-45 ports support auto-negotiation and forced Half/Full-Duplex and manual crossover switch
19f9cefdfb07230a68581d617885a3af XL
iConverter® 2Fx
  • 100BASE-FX to 100BASE-FX Fast Ethernet fiber converter and switch
  • Supports MM, SM DF with ST, SC and LC connectors, and SM SF with SC connectors
  • 100Mbps Ethernet backplane ports for connectivity to adjacent modules
  • Supports IEEE 802.1Q Tag VLAN, Q in Q and Port VLAN
  • Supports IEEE 802.1p Prioritization QoS
8b6e33345ac8d5ffd9cf0d107a7d9e9d XL
iConverter® 4Tx
  • 4-Port 10/100BASE-T Ethernet switch module
  • Conforms to IEEE 802.3, 10BASE-T and 100BASE-TX specs
  • Port VLAN, Port Access Control and MIB Statistics
  • 100Mbps Ethernet backplane ports for connectivity to adjacent modules
  • Multiple 4Tx modules can be installed in the same chassis for high-density port configurations
8fe3e0f34d3083cba6fe73d62a783d7f XL
iConverter® 4Tx VT
  • 4-Port 10BASE-T or 100BASE-TX Ethernet switch module
  • Conforms to IEEE 802.3, 10BASE-T and 100BASE-TX specs
  • 100Mbps Ethernet backplane ports for connectivity to adjacent modules
  • Supports IEEE 802.1Q Tag VLAN, Q-in-Q Multi-tagging and Port VLAN
  • Supports IEEE 802.1p Prioritization QoS
37a06e4a72d6cb27621f1ed829bbee81 XL
iConverter® 4GT
  • 4-Port 10/100/1000BASE-T standal1 or plug-in Ethernet switch module
  • Quality of Service and traffic prioritization supported via Class of Service P-bit value
  • Plug-in module features 100/1000Mbps Ethernet backplane ports for connectivity to adjacent modules
  • Management of the plug-in module is available with the addition of a management module to the chassis
  • SNMP management via NetOutlook? provides real-time port and module information, remote parameter configuration and trap notification
542390225756f78888142d54f3d17e01 XL
iConverter® Gx AN
  • 1000BASE-T copper to 1000BASE-X fiber converter
  • SFP transceivers with Optical Statistics for standard, CWDM or DWDM applications
  • Fixed-fiber connectors support MM, SM DF with ST, SC and LC connectors, and SM SF with SC connectors
  • Fiber port supports auto or manual negotiation
  • User-selectable link fault detection modes facilitate quick fault detection, isolation and reporting
c1572c59821062c96d0fc33ad32a2983 XL
iConverter® GX/T
  • 10/100/1000 copper to Gigabit fiber media converter
  • Conforms to 10BASE-T, 100BASE-TX, 1000BASE-T and 1000BASE-X specs
  • Supports VLANs, Port Access Control and MIB statistics
  • Supports MM, SM DF with ST, SC and LC connectors, and SM SF with SC connectors
  • Ethernet backplane ports for connectivity to adjacent modules
620466077c427f141effa294382f5fba XL
iConverter® GX/X
  • Conforms to IEEE 802.3 and 1000BASE-X specs
  • Supports MM, SM DF with SC and LC connectors, and SM SF with SC connectors
  • Features Port VLAN, Tag VLAN, Port Access Control and MIB statistics
  • User-selectable link fault detection modes facilitate quick fault detection, isolation and reporting
  • Modules are hot-swappable in 19-Module, 5-Module, 2-Module or 1-Module chassis
a522a6005d1cb428ea34ef1769cd7452 XL
iConverter® GX/F
  • Conforms to IEEE 802.3z and 802.3u specs
  • Supports MM, SM DF with SC and LC connectors, and SM SF with SC connectors
  • Features Port VLAN, Tag VLAN, Port Access Control and MIB statistics
  • Full-Duplex auto-negotiation or manual negotiation
  • User-selectable link fault detection modes facilitate quick fault detection, isolation and reporting
eb6c7c01c4e98e1f2578f9959463b973 XL
iConverter® XG and XG+
  • Protocol-transparent 9.8 Gbps to 11.32 Gbps fiber converter and transponder with ultra-low latency
  • Compatible with 10G Ethernet, 10G S1T/SDH, 10G Fibre Channel, 10G OTN (G.709) and 9.8 Gbps CPRI
  • Functions as a fiber mode converter, a CWDM or DWDM transponder, or a fiber repeater supporting the three Rs
  • Automatic Speed Selection detects the data rate of the installed transceiver and the connected device
  • Self-Diagnostic Circuit Test for validating link connectivity
22c02097e4438bd2f2f3fe4a6a3ab0e1 XL
iConverter® 100FF
  • Conforms to IEEE 802.3 and 100BASE-FX specs
  • Module supports a constant rate signal from 1Mbps to 100Mbps
  • Supports MM, SM DF with ST and SC connectors, and SM SF with SC connectors
  • User-selectable link fault detection modes facilitate quick fault detection, isolation and reporting
  • LED displays for immediate visual status of each port
Results 1 - 24 of 65