iConverter 1-Module Chassis Module not included

iConverter 1-Module Chassis

1-Module Power Chassis

The compact 1-Module iConverter Power Chassis supports a single iConverter module and is powered by an external AC power adapter or external DC power source (20 to 60VDC). The 1-Module Power Chassis is designed for network edge, Customer Premises or Central Office deployments where low profile, low cost and flexible upgrades are important.

question
Contact Us Where to Buy

1-Module Power Chassis with external AC adapter power supply or direct DC power

  • DC input supports 20 to 60VDC via three pin terminal connector with isolated ground
  • NEBS Level 3 Compliant
  • Houses all single-slot models of hot-swappable iConverter media converter and switch modules
  • Models 8241-X and 8243-X support Dying Gasp (Power Loss Trap) when used with a Network Interface Device
  • Wall-mount or tabletop options for flexible installations
  • DIN-rail and 19” rack mounting options available
  • Management is available with the addition of a Network Interface Device (NID) in the chassis
  • SNMP management via NetOutlook® provides real-time port and module status information, remote parameter configuration and trap notification
  • Commercial (0 to +50° C) and wide (-40 to +60° C) temperature ranges
  • Lifetime Warranty and free 24/7 Technical Support

The 1-Module Power Chassis is designed for network edge or Customer Premises deployments where low-profile, low cost and flexible upgrades are important. The compact 1-Module iConverter Power Chassis supports a single iConverter module and is powered by an external AC power adapter or external DC power source (20 to 60VDC).

Any iConverter single-slot module can be installed in the 1-Module Power Chassis and function as a standalone unit. The unit can be wall or DIN-rail mounted with optional mounting kits. Utilizing the iConverter 19” rack-mount shelf, up to four chassis can be securely mounted side-by-side.

The chassis supports managed edge demarcation applications when an iConverter Network Interface Device (NID) plug-in module with integrated management (such as the 10/100M2 shown in the photos above) is installed in the chassis. Models with “Dying Gasp” support allow NIDs to send a power failure alarm in the event of power loss.

Description
1-Module AC (US)
1-Module AC (Univ)
1-Module AC (US)
1-Module AC (Univ)
1-Module 48VDC
Model Number
Standard:
Dying Gasp:
 
8240-1
8241-1
 
8240-2
8241-2
 
8242-1
8243-1
 
8242-2
8243-2
 
8242-9
8243-9
Module Capacity
1
Regulatory Compliances
UL, CE, FCC Class A, NEBS Level 3, RohS2 (6/6), WEEE, REACH
Power Supply Type
Wall Power Supply
Tabletop Power Supply
Tabletop Power Supply
Tabletop Power Supply
Internal DC Supply
Input Power
Requirements
(typical)
120VAC,
60Hz
0.13A @ 120VAC
100 to 240VAC,
50 / 60Hz
0.19A @ 120VAC
120VAC,
60Hz
1.0A @ 120VAC
100 to 240VAC
50 / 60Hz
1.0A @ 120VAC
20 to 60VDC*
0.6A Max
Output Power
3.3 watts / 5.0 watts
1A @ 3.3VDC /
1.5A @ 3.3VDC
3.3 watts / 5.0 watts
1A @ 3.3VDC /
1.5A @ 3.3VDC
8.3 watts
2.5A @ 3.3VDC
8.3 watts
2.5A @ 3.3VDC
8.3 watts
2.5A @ 3.3VDC
Power Connector
US Plug
(2.5mm Barrel Connector)
IEC 320 Socket
(2.5mm Barrel Connector)
US Power Cord
(2.1mm Barrel Connector)
IEC 320 Socket
(2.1mm Barrel Connector)
3 Position Terminal
(Isolated)
Dimensions
W: 3.8" x D: 5.5" x H: 1.0"
L: 96.52 mm x B: 139.7 mm x H: 25.4 mm
W: 3.8" x D: 6.0" x H: 1.0"
L: 96.52 mm x B: 152.4 mm x H: 25.4 mm
Weight
1.5 lbs. (0.68 kg)
Temperature Commercial:
Wide:
Storage:
   0 to 50°C
-40 to 60°C
-40 to 80°C
Humidity
5 to 95% (non-condensing)
Altitude
-100m to 4,000m
MTBF (hrs) 250,000 100,000 260,000 260,000 2,700,000
Warranty
Lifetime warranty with 24/7/365 free Technical Support

 *Effective range is 18 to 60VDC when using a module without dying gasp support.

Description
1-Module Chassis
AC (US)
AC (Univ)
AC (US)
AC (Univ)
48VDC
1-Module Chassis
8240-1
(3.3 watts)
8240-2
(3.3 Watts)
8242-1
(8.3 Watts)
8242-2
(8.3 Watts)
8242-9
(8.3 Watts)
1-Module Chassis
w/Dying Gasp Support
8241-1
(5 Watts)
8241-2
(5 Watts)
8243-1
(8.3 Watts)
8243-2
(8.3 Watts)
8243-9
(8.3 Watts)
  For wide temperature (-40 to 60°C), add a "W" to the end of the model number.
  Contact Omnitron for extended temperature (-40 to 75°C) and RoHS (5/6) compliant models.

 

Accessories
Model Number
Description
8249-0
Wall-Mount Hardware Kit
8260-0
19" Rack-Mount Shelf
8250-0
DIN Rail Mounting Kit
9130-0
NEBS Grounding Kit for 8.3 watt Chassis Only

Use the Power Calculator  to determine the iConverter chassis power supplies required for your module configuration.

Ask a Question

(*) Required field

1000 characters left