Pluggable Optical Transceivers

Standard Wavelength SFP, SFP+ and XFP Transceivers

Omnitron pluggable transceivers are interchangeable compact media connectors that enable a single network device to connect to a wide variety of fiber and copper cable types and distances.

Visit the Product Web Page

CWDM Wavelength SFP, SFP+ and XFP Transceivers

Omnitron pluggable transceivers for CWDM wavelengths are used with iConverter, FlexPoint, OmniConverter and miConverter products to connect legacy (standard wavelength) equipment to iConverter CWDM Multiplexers.

Visit the Product Web Page

iConverter Network Interface Devices with Optical Transceivers

iConverter Standalone NIDs are MEF 9 and MEF 14 certified compliant, and provide carrier-grade Ethernet demarcation at the Customer Premises with comprehensive OAM, management and provisioning. A wide variety of copper-to-fiber and fiber-to-fiber models are available to support 100 and 1000Mbps fiber connectivity.

Visit the Product Web Page

iConverter Media Converters with Optical Transceivers

iConverter XG

10 Gigabit Media Converter with Two Pluggable Transceiver Ports

The iConverter XG is a 10 Gigabit, protocol-transparent media converter with two pluggable transceiver ports, supporting any combination of XFP and SFP+ transceivers.  The unmanaged iConverter XG standalone converter supports 100% traffic throughput with no packet size restrictions. It can function as copper-to-fiber converter, a fiber mode converter, a WDM transponder or a fiber repeater.

Visit the Product Web Page

iConverter xFF

SFP to SFP Managed Protocol-Transparent Fiber Converter

The iConverter xFF is a protocol-transparent managed media converter that provides reliable and cost-effective conversion between different wavelengths, multimode and single-mode, and dual and single-fiber networks.

Visit the Product Web Page

iConverter Gx AN

Gigabit Ethernet Media Converter

The iConverter Gx AN managed media converter provides 1000BASE-T UTP to 1000BASE-X fiber conversion between Gigabit networking devices. The iConverter Gx AN features user-selectable link fault detection modes and auto-negotiation on both the fiber and UTP ports.

Visit the Product Web Page

iConverter T1/E1

T1/E1 RJ45/RJ48 or Coax to Fiber Media Converter

The iConverter T1/E1 media converters provide T1/ E1 Copper-to-Fiber conversion to extend T1 fiber distances up to 120km. They supports AMI or B8ZS/HDB3 modes and feature a RJ45/RJ48 port with crossover switch for ease of installation. .

Visit the Product Web Page

iConverter T3/E3

T3(DS3)/E3 Coax to Fiber Media Converter

The iConverter T3/E3 media converter provide T3/ E3 Copper-to-Fiber conversion to extend T3 fiber distances up to 120km. The T3/E3 is framing independent and supports B3ZS for T3 (DS3) and HDB3 for E3 codes.

Visit the Product Web Page

iConverter x21

X.21 Serial to Fiber Media Converter

The iConverter X21 serial-to-fiber media converter supports X.21 and RS-530 applications featuring several configuration modes to enable connections with a wide variety of X.21 and RS-530 devices.

Visit the Product Web Page

iConverter STM-1

Coax-to-Fiber Converters for OC-3 / STM1

The iConverter STM-1 copper-to-fiber media converter converts 155.52 Mbps STM-1e coax to STM-1 or OC-3 fiber.

Visit the Product Web Page

iConverter T1/E1 Multiplexers with Optical Transceivers

iConverter T1/E1 MUX

The iConverter T1/E1 MUX multiplexes up to sixteen T1 or E1 circuits and one 10/100/1000 Ethernet service onto a fiber optic link. The transmission of the multiplexed traffic is extended over a fiber pair or single fiber link.

Visit the Product Web Page

iConverter 4xT1/E1 MUX

Unmanaged T1/E1 Multiplexer

The iConverter 4xT1/E1 MUX multiplexes up to four T1/E1 copper circuits and one optional 10/100 Ethernet UTP port onto a fiber optic link. The aggregated services can be extended up to 120km across a fiber pair or up to 40km across a single fiber link.

Visit the Product Web Page

iConverter 4xT1/E1 MUX/M

Managed T1/E1 Multiplexer

The iConverter 4xT1/E1 MUX/M multiplexes up to four T1/E1s and Ethernet onto a fiber optic transport link, and features remotely managed testing and configuration capabilities.

Visit the Product Web Page

FlexPoint Unmanaged Media Converters with Optical Transceivers

FlexPoint GX/T

10/100/1000 UTP to 100/1000X Ethernet Media Converter

The FlexPoint GX/T is a 10/100/1000BASE-T UTP to 1000BASE-X modular fiber media converter that supports jumbo frames up to 10,240 bytes. The GX/T features Small Form Pluggable (SFP) transceivers that support both 100BASE-FX and 1000BASE-X for interoperability with Gigabit and Fast Ethernet fiber equipment.

Visit the Product Web Page

miConverter Miniature Media Converters with Optical Transceivers

miConverter GX/T

10/100/1000BASE-T to 1000BASE-X Ethernet Media Converter

The miConverter GX/T is a miniature 10/100/1000BASE-T UTP copper to 1000BASE-X fiber media converter that supports jumbo frames up to 10,240 bytes. The miConverter GX/T provides cost-effective fiber connectivity from Ethernet switches to diagnostic equipment, desktop and laptop computers.

Visit the Product Web Page

OmniConverter PoE Media Converters with Optical Transceivers

OmniConverter ™ GPoE/S and GPoE+/S

Multi-port Gigabit Media Converter with PoE/PSE

The OmniConverter GPoE/S is a multi-port media converter that provides 10/100/1000BASE-T UTP to 100BASE-FX or 1000BASE-X fiber and supports Power-over-Ethernet (PoE and POE+). A variety of port configurations are available, including single or dual UTP or SFP ports.

Visit the Product Web Page

OmniConverter ™ FPoE/S and FPoE+/S

Multi-port Gigabit Media Converter with PoE/PSE

The OmniConverter is copper-to-fiber media and power injector that supports both the IEEE 802.3af PoE standard (15.4W of power) and the new IEEE 802.3at PoE+ standard (25.5W of power). OmniConverter media converters can provide power to one or two Powered Devices (PDs) using standard UTP cables that carry the Ethernet data.

Visit the Product Web Page