Pluggable Transceivers
Small Form Pluggable Optical Transceivers
Omnitron pluggable transceivers are interchangeable compact media connectors that enable a single network device to connect to a wide variety of fiber and copper cable types and distances.
for CWDM Wavelengths
Omnitron pluggable transceivers are interchangeable compact media connectors that enable a single network device to connect to a wide variety of fiber and copper cable types and distances.
Gigabit Media Converter Power over Ethernet (PoE/PoE+)
The OmniConverter GPoE/S is a multi-port media converter that provides 10/100/1000BASE-T UTP to 100BASE-FX or 1000BASE-X fiber and supports Power-over-Ethernet (PoE and POE+). A variety of port configurations are available, including single or dual UTP or SFP ports.
Multi-port 10/100 Media Converter with Power over Ethernet (PoE/PoE+)
The OmniConverter is copper-to-fiber media and power injector that supports both the IEEE 802.3af PoE standard (15.4W of power) and the new IEEE 802.3at PoE+ standard (25.5W of power). OmniConverter media converters can provide power to one or two Powered Devices (PDs) using standard UTP cables that carry the Ethernet data.
Coax to Fiber Media Converter
The iConverter STM-1 copper-to-fiber media converter converts 155.52 Mbps STM-1e coax to STM-1 or OC-3 fiber.
X.21 Serial to Fiber Media Converter
The iConverter X21 serial-to-fiber media converter supports X.21 and RS-530 applications featuring several configuration modes to enable connections with a wide variety of X.21 and RS-530 devices.
Managed T1/E1 Multiplexer
The iConverter 4xT1/E1 MUX/M multiplexes up to four T1/E1s and Ethernet onto a fiber optic transport link, and features remotely managed testing and configuration capabilities.
Unmanaged T1/E1 Multiplexer
The iConverter 4xT1/E1 MUX multiplexes up to four T1/E1 copper circuits and one optional 10/100 Ethernet UTP port onto a fiber optic link. The aggregated services can be extended up to 120km across a fiber pair or up to 40km across a single fiber link.
T3/E3 Managed Media Converter
The iConverter T3/E3 media converter provide T3/ E3 Copper-to-Fiber conversion to extend T3 fiber distances up to 120km. The T3/E3 is framing independent and supports B3ZS for T3 (DS3) and HDB3 for E3 codes.
T1/E1 Managed Media Converter
The iConverter STM-1 copper-to-fiber media converter converts 155.52 Mbps STM-1e coax to STM-1 or OC-3 fiber.
SFP to SFP Protocol-Transparent Media Converter and WDM Transponder
The iConverter xFF is a protocol-transparent managed media converter that provides reliable and cost-effective conversion between different wavelengths, multimode and single-mode, and dual and single-fiber networks.
10Gbps Protocol-Transparent Media Converter/Transponder
The iConverter XG is a 10 Gigabit, protocol-transparent media converter with two pluggable transceiver ports, supporting any combination of XFP and SFP+ transceivers. The unmanaged iConverter XG standalone converter supports 100% traffic throughput with no packet size restrictions. It can function as copper-to-fiber converter, a fiber mode converter, a WDM transponder or a fiber repeater.
1000BASE-T to 1000BASE-SX/LX Managed Media Converter
The iConverter Gx AN managed media converter provides 1000BASE-T UTP to 1000BASE-X fiber conversion between Gigabit networking devices. The iConverter Gx AN features user-selectable link fault detection modes and auto-negotiation on both the fiber and UTP ports.
10/100/1000 UTP to 100/1000X Fiber Ethernet Media Converter
The FlexPoint GX/T is a 10/100/1000BASE-T UTP to 1000BASE-X modular fiber media converter that supports jumbo frames, and features fixed fiber ports or Small Form Pluggable (SFP) transceivers. SFPs are available for 100BASE-FX or 1000BASE-X, and fixed fiber ports support multimode and single-mode fiber with ST and SC connectors and single-fiber with SC connectors.
T1/E1 Multiplexer
The iConverter T1/E1 MUX multiplexes up to sixteen T1 or E1 circuits and one 10/100/1000 Ethernet service onto a fiber optic link. The transmission of the multiplexed traffic is extended over a fiber pair or single fiber link.
10/100/1000BASE-T to 1000BASE-X Ethernet Media Converter
The miConverter GX/T is a miniature 10/100/1000BASE-T UTP to 1000BASE-X modular fiber media converter that supports jumbo frames, and features fixed fiber ports or Small Form Pluggable (SFP) transceivers. Fixed fiber ports support multimode and single-mode fiber with ST and SC connectors and single-fiber with SC connectors.
