iConverter Multi-Service Platform
The modular iConverter platform consists of Ethernet Network Interface Devices, CWDM multiplexers, T1/E1 multiplexers and a variety of managed media converters. iConverter fiber connectivity products are available as chassis plug-in modules and standalone configurations. This flexible architecture provides a multi-service platform capable of delivering Ethernet, TDM, SONET and other services over fiber, or multiplexing different services over a CWDM common fiber link.
- Lifetime Warranty on most products
- Free 24/7 Technical Support
- Made in the USA
- NEBS Level 3 certified
- UL, CE and FCC compliant
- MEF 9, 14 and 21
- ROHS and WEEE compliant
- 10, 100, 10/100 Ethernet
- 10/100/1000, Gigabit Ethernet
- 10 Gigabit Ethernet
- T1/E1, T3/DS3/E3
- OC3/STM1, OC12/STM4
- RS-232/422/485/530, X.21
- Protocol Transparent
- Deployed worldwide in service provider, enterprise, government and utility networks
- Modular architecture of high-density chassis, plug-in modules and standalone modules
- Manageable via SNMPv1/v2c/v3, Telnet and secure IP-less management
- Commercial (0 to 50ºC), Wide (-40 to 60ºC) and Extended (-40 to 75ºC) temperature ranges
- Select modules support SFP, SFP+ and XFP pluggable transceivers
Network Interface Devices (NIDs)
iConverter carrier-class Ethernet Network Interface Devices (NIDs) are Carrier Ethernet 2.0 certified compliant to provide intelligent demarcation for Carrier Ethernet services. iConverter NIDs provide demarcation for Ethernet services delivered across one or more operator networks, with state-of-the-art provisioning, performance monitoring, protection and fault detection capabilities.
Click to learn about iConverter Network Interface Devices
Media Converters and Transponders
iConverter media converters provide seamless integration of copper and fiber and different fiber types. iConverter media converter modules support a wide variety of protocols, data rates and media types to create a reliable and cost-effective network. iConverter media converters support pluggable transceivers for flexible connectivity solutions for standard and CWDM wavelengths
iConverter Copper-to-Fiber Media Converters
iConverter Fiber-to-Fiber Media Converters
CWDM Multiplexers
iConverter CWDM Multiplexers/Demultiplexers and Add/Drop Multiplexers increase the bandwidth capacity of existing single-fiber or dual fiber infrastructure by multiplexing up to sixteen independent wavelengths over a fiber optic connection. The modular iConverter CWDM MUX products utilize a small and scalable plug-in form factor and can be installed in any iConverter chassis, achieving some of the highest port densities in the industry.
Learn more about iConverter CWDM Multiplexers
T1/E1 Multiplexers
iConverter T1/E1 MUX products multiplex up to sixteen independent T1/E1 circuits and Ethernet from copper links onto a fiber link, CWDM wavelength or Ethernet Virtual Connection (EVC). Designed for mobile backhaul, and T1 demarcation extension up to 120km, iConverter T1/E1 multiplexers are available in modular or fixed chassis configurations with 4, 8, 12 or 16 T1/E1 ports
Learn more about iConverter T1/E1 Multiplexers
Switch Modules and More
The iConverter Multi-Service Platform also features four-port switch modules, redundant-link Ethernet media converters, and UTP to coax media converters. iConverter 10/100 and 10/100/1000 switch modules are managed four-port Ethernet switches that can be installed in a variety of chassis configurations with backplane connectivity to other iConverter modules
Learn more about other iConverter Copper Switch Modules
iConverter Management System
iConverter modules can be managed or unmanaged. When managed, the iConverter management system provides the ability to remotely monitor network performance, generate statistic reports, configure hardware parameters, provision services and perform advanced fault detection. The iConverter Multi-Service Platform can be managed with Omnitron’s NetOutlook® management software or third party SNMP software.
For Enterprise Networks, NetOutlook® SNMP Management Software provides a Windows-based graphical user interface for managing the iConverter Multi-Service Platform with real-time status monitoring and configuration control of iConverter chassis and modules.
Learn more about the NetOutlook and the iConverter Management System
For Service Provider networks NetOutlook® EMS provides an Element Management System for iConverter Network Interface Devices that centralizes and simplifies the management of complex networks with full FCAPS compliance.
Chassis and Mounting Options
Chassis options include high-density, rack-mount chassis for central office and network core deployments, and a variety of compact chassis for edge deployments. They feature redundant power supplies and data backplanes to provide the reliability and flexibility for today’s evolving network. DIN-Rail brackets and rack-mount shelves are also available.
