iConverter Copper-to-Fiber Media Converters
iConverter managed copper-to-fiber media converters provide seamless integration of copper and fiber in Enterprise, Government and Carrier networks. iConverter media converter modules support a wide variety of protocols, data rates and cabling media types for flexible fiber connectivity in diverse network topologies. Select iConverter models support advanced switching capabilities and iConverter Fiber-to-Fiber NIDs feature integrated management and carrier-grade fault detection capabilities.
iConverter media converter modules that support pluggable transceivers enable connectivity between copper network devices and fiber with a variety of distances and wavelengths. Pluggable transceivers that support CWDM wavelengths to enable connectivity to iConverter CWDM multiplexer modules.
Technologies Supported:
- 10, 100, 10/100 Ethernet
- 10/100/1000 and Gigabit Ethernet
- 10 Gigabit Ethernet
- T1/E1
- T3/E3/DS3
- Serial
Fiber and Connector Types:
- SFP, SFP+ and XFP Transceivers
- SFP, SFP+ and XFP CWDM Transceivers
- ST, SC, LC and MT-RJ Connectors
- Single Mode and Multi-mode Fiber
- Dual and Single Fiber
iConverter Ethernet Media Converters
-
iConverter XGT+
10GBASE-T Ethernet Media Converter
The iConverter XG/T is a 10 Gigabit Ethernet media converter with one RJ-45 port and one pluggable transceiver port, that provides copper to fiber and copper to copper media conversion. Copper to fiber conversion is achieved with XFP or SFP+ fiber transceivers. XFP and SFP+ transceivers support multimode and single-mode fiber, and CWDM/DWDM wavelengths. Copper-to-copper conversion is achieved with a CX4 XFP transceiver.
-
iConverter XG and XG+
10Gbps Protocol-Transparent Media Converter/Transponder
The iConverter XG is a 10 Gigabit, protocol-transparent media converter with two pluggable transceiver ports, supporting any combination of XFP and SFP+ transceivers. The unmanaged iConverter XG standalone converter supports 100% traffic throughput with no packet size restrictions. It can function as copper-to-fiber converter, a fiber mode converter, a WDM transponder or a fiber repeater.
-
iConverter GX/TM2
10/100/1000BASE-T UTP to 1000BASE-X Intelligent Media Converter and Network Interface Device
iConverter GX/TM2 NIDs provide UTP to fiber media conversion with integrated management and for secure Ethernet demarcation with 802.3ah OAM and provisioning. Advanced features include VLAN, QoS, bandwidth control and SFP fiber transceivers.
-
iConverter GXTM*
10/100/1000BASE-T UTP to 1000BASE-X Intelligent Media Converter and Network Interface Device
*The iConverter GX/TM modules are not supported in future software releases and are not recommended for new designs or deployments. View the iConverter GX/TM2 web page.
-
iConverter GX/T
10/100/1000BASE-T UTP to 1000BASE-X Managed Ethernet Media Converter
iConverter GX/T media converters provide 10/100/1000 UTP to Gigabit fiber connectivity, and support many advanced features including VLAN technology and Port Access Control.
-
iConverter Gx*
1000BASE-T to 1000BASE-SX/LX Managed Media Converter
*The iConverter Gx modules are not supported in future software releases and are not recommended for new designs or deployments. View the iConverter Gx AN web page.
-
iConverter Gx AN
1000BASE-T to 1000BASE-SX/LX Managed Media Converter
The iConverter Gx AN managed media converter provides 1000BASE-T UTP to 1000BASE-X fiber conversion between Gigabit networking devices. The iConverter Gx AN features user-selectable link fault detection modes and auto-negotiation on both the fiber and UTP ports.
-
iConverter 10/100M2
10/100BASE-T UTP to 100BASE-X Intelligent Media Converter and Network Interface Device
iConverter 10/100M2 NIDs support all of the features included in the 10/100M, plus Layer 2 Protocol Control filtering, 2,048 kb maximum frame size and enhanced rate limiting in 64kb increments.
-
iConverter 10/100M*
10/100BASE-T UTP to 100BASE-X Intelligent Media Converter and Network Interface Device
*iConverter 10/100M modules are not supported in future software releases and are not recommended for new designs or deployments. View the iConverter 10/100M2 web page.
-
iConverter 10/100VT
10/100BASE-T UTP to 100BASE-X Ethernet Media Converter with VLAN
iConverter 10/100VT manageable media converters provide 10/100 UTP to Fast Ethernet Fiber conversion as well as rate conversion between 10BASE-T or 100BASE-Tx and 100BASE-Fx fiber. Advanced features include VLAN technology, QoS and bandwidth control.
-
iConverter 10/100
10/100BASE-T UTP to 100BASE-X Ethernet Media Converter
iConverter 10/100 manageable media converters provide UTP to Fiber conversion as well as rate conversion between 10BASE-T or 100BASE-Tx and 100BASE-Fx fiber.
-
iConverter 100Fx/Tx
100BASE-TX to 100BASE-FX Managed Ethernet Media Converter
iConverter 100Fx/Tx manageable media converters provide Fast Ethernet UTP to Fiber conversion and feature user-selectable link fault detection modes, a UTP crossover switch and UTP Half or Full-Duplex auto-negotiation.
-
iConverter Tx/2Fx and Tx/2Tx
Redundant Fast Ethernet Fiber and UTP Managed Ethernet Media Converters
The manageable iConverter Redundant Fast Ethernet modules provide UTP to redundant fiber link reliability with a link fault detection time of 100 microseconds. The iConverter redundant modules provide the rapid response time required for mission critical network applications.
-
iConverter 10FL/T
10BASE-T to 10BASE-FL Managed Ethernet Media Converter
iConverter 10FL/T manageable media converters provide 10Mbps UTP to fiber connectivity
T3/E3 to Fiber Media Converters
-
iConverter T3/E3
T3/E3 Managed Media Converter
The iConverter T3/E3 media converter provide T3/ E3 Copper-to-Fiber conversion to extend T3 fiber distances up to 120km. The T3/E3 is framing independent and supports B3ZS for T3 (DS3) and HDB3 for E3 codes.
T1/E1 to Fiber Media Converters
-
iConverter T1/E1
T1/E1 Managed Media Converter
The iConverter STM-1 copper-to-fiber media converter converts 155.52 Mbps STM-1e coax to STM-1 or OC-3 fiber.
Serial to Fiber Media Converters
-
iConverter RS232
Managed Serial RS-232 to Fiber Media Converter
FlexPoint 232 serial RS-232 to fiber converters automatically supporting speeds of up to 115,200 baud providing the flexibility to facilitate a wide range of needs and applications.
-
iConverter RS422/485
Managed Serial RS422/485 to Fiber Media Converter
iConverter RS422/485 manageable serial to fiber media converters transmit serial protocol over fiber media. The RS422/485 features DIP-switch configuration of DTE or DCE device for easy connection to serial devices, and remote fiber loop-back switch for testing of fiber link, even during serial transmission.
-
iConverter x21
X.21 Serial to Fiber Media Converter
The iConverter X21 serial-to-fiber media converter supports X.21 and RS-530 applications featuring several configuration modes to enable connections with a wide variety of X.21 and RS-530 devices.
STM-1 Coax to Fiber
-
iConverter STM1
Coax to Fiber Media Converter
The iConverter STM-1 copper-to-fiber media converter converts 155.52 Mbps STM-1e coax to STM-1 or OC-3 fiber.
SFP Transceivers
-
Pluggable Optical Transceivers
Small Form Pluggable Optical Transceivers
Omnitron pluggable transceivers are interchangeable compact media connectors that enable a single network device to connect to a wide variety of fiber and copper cable types and distances.
-
CWDM Pluggable Optical Transceivers
for CWDM Applications
Omnitron pluggable transceivers are interchangeable compact media connectors that enable a single network device to connect to a wide variety of fiber and copper cable types and distances.
