- Home
- » Products
- » iConverter Overview
- » iConverter T1/E1
iConverter T1/E1
T1/E1 Managed Media Converter
Click Image to Enlarge
Overview
- T1/E1 RJ48 or coaxial to fiber converter
- Supports multimode, single-mode and single-fiber with ST, SC, LC and MT-RJ connectors
- Supports Small Form Pluggable (SFP) transceivers
- The RJ48 port DCE/DTE switch facilitates connectivity to devices such as PBXs and CSUs
- User-selectable Local Loopback, Force 1's to Copper, Force 1's to Fiber and Fiber Test modes
- Supports AMI or B8ZS/HDB3 modes
- Management is available with the addition of a management module to the chassis
- SNMP management via NetOutlook® provides real-time port and module information, remote parameter configuration and trap notification
- Modules are hot-swappable in 19-Module, 5-Module, 2-Module or 1-Module chassis
- LED displays for immediate visual status of each port
- Conforms to ANSI, AT&T, ETSI and ITU specifications
- Lifetime Warranty and free 24/7 Technical Support
The iConverter T1/E1 managed media converters are members of the modular iConverter product family. They provide T1/E1 copper to fiber conversion.
iConverter T1/E1 models are available with multimode, single-mode and single-fiber options. The Small Form Pluggable (SFP) model supports a wide variety of SFP transceivers. The copper interface features an RJ48 connector for balanced T1/E1 applications, and models featuring coaxial BNC connectors are available for unbalanced E1 applications.
The iConverter T1/E1 features user-selectable Local Loopback, Force 1's to Copper, Force 1's to Fiber, and Fiber Optic Test modes to facilitate quick fault detection, isolation and reporting.
iConverter T1/E1 modules are hot-swappable and can be mounted in a 19-Module (2U high) or 5-Module (1U high) rack-mountable chassis (19-inch or 23-inch) with any combination of redundant AC, 24VDC or 48VDC power supplies. It can also be mounted in a 2-Module AC or 18 to 60VDC powered chassis, or in a 1-Module AC/DC powered chassis.
The iConverter family of managed fiber access media converters are used in Service Provider access networks and Enterprise LANs. iConverter media converters provide fiber connectivity with copper to fiber, multimode fiber to single-mode fiber, or dual fiber to single-fiber conversions.
Management
Management is accomplished by using a Network Management Module (NMM) or a media converter with integrated management (such as an iConverter 10/100M2) that provides monitoring, remote configuration and trap notification. The management module can be accessed via SNMP, Telnet and via a serial port. The SNMP-based management is accomplished via Omnitron's intuitive, graphic-oriented NetOutlook management software or third party SNMP management software, while the Telnet and the serial interfaces have an easy-to-use, menu-driven interface.
Some of the real-time T1/E1 parameters that can be monitored include power, link and data receive status. Other parameters include module type and model, hardware and software revisions, serial numbers and a user-defined identifier.
The user can override the T1/E1 module's physical DIP-switch settings by using SNMP or Telnet to remotely configure DIP-switch-selectable parameters such as line settings and loopback control.
In addition to all standard iConverter SNMP traps such as module insertion and removal, the T1/E1 modules can generate traps on port state changes including link-up and link-down. Trap monitoring of specific events can be selectively enabled or disabled by the network administrator.
Specifications
| Model Type | T1/E1 |
| Protocols | ANSI: T1.403, T1.102, AT&T: T62411, ITU: G.703, G.704, G.706, G.736, G.775, G.823, ETSI: ETS 300 166 |
| Copper Connectors | RJ-45/RJ-48, Coax |
| Fiber Connectors | SC, ST, LC MT-RJ, SFP, Single-Fiber SC |
| Controls | UTP X-over, CableType / Distance, Loop, FO1, Cu1, FOT |
| LED Displays | Power, Test, RJ-45/RJ-48 Link, F/O Link |
| Dimensions | W:0.85" x D:4.5" x H:2.8" |
| Weight | 8 oz. |
| Compliance | UL, CE, FCC Class A, NEBS Level 3 |
| Power Requirement | 0.7A @ 3.3VDC (typical) |
| Temperature | Standard: 0 to 50º C
Wide: -40 to 60º C Storage: -40 to 80º C |
| Humidity | 5 to 95% (non-condensing) |
| Altitude | -100m to 4000m |
| MTBF (hrs) | 877,000 |
Ordering Information
| Model Type | Fiber / Media Type | Distance | Connector Types | Tx λ (nm) | Rx λ (nm) | Min. Tx Power (dBm) |
Max. Tx Power (dBm) |
Min. Rx Sense (dBm) |
Max. Rx Sense (dBm) |
Link Budget (dBm) |
||||
| ST | SC | MT-RJ | LC | SFP | ||||||||||
| T1/E1 Copper RJ-48 Dual Fiber | - | - | - | - | - | - | 8719-0** | - | - | - | - | - | - | - |
| MM | 5km | 8700-0 | 8702-0 | 8704-0 | - | - | 1310 | 1310 | -23 | -12 | -31 | -12 | 8 | |
| SM | 30km | 8701-1 | 8703-1 | 8705-1 | 8707-1 | - | 1310 | 1310 | -15 | -8 | -31 | -8 | 16 | |
| SM | 60km | 8701-2 | 8703-2 | - | 8707-2 | - | 1310 | 1310 | -5 | 0 | -31 | -3* | 26 | |
| SM | 120km | - | 8703-3 | - | 8707-3 | - | 1550 | 1550 | -5 | 0 | -31 | -3* | 26 | |
| T1/E1 Coax + RJ-48 Dual Fiber (2-slot module) |
MM | 5km | 8720-0 | 8722-0 | 8724-0 | - | 8739-0** | 1310 | 1310 | -23 | -12 | -31 | -12 | 8 |
| SM | 30km | 8721-1 | 8723-1 | 8725-1 | 8727-1 | - | 1310 | 1310 | -15 | -8 | -31 | -8 | 16 | |
| SM | 60km | 8721-2 | 8723-2 | - | 8727-2 | - | 1310 | 1310 | -5 | 0 | -31 | -3* | 26 | |
| SM | 120km | - | 8723-3 | - | 8727-3 | - | 1550 | 1550 | -5 | 0 | -31 | -3* | 26 | |
| T1/E1 Copper RJ-48 Single-Fiber | SM | 20km | - | 8710-1 | - | - | - | 1310 | 1550 | -15 | -5 | -30 | -3 | 15 |
| SM | 40km | - | 8710-2 | - | - | - | 1310 | 1550 | -8 | 0 | -30 | -3* | 22 | |
| SM | 20km | - | 8711-1 | - | - | - | 1550 | 1310 | -15 | -5 | -30 | -3 | 15 | |
| SM | 40km | - | 8711-2 | - | - | - | 1550 | 1310 | -8 | 0 | -30 | -3* | 22 | |
| T1/E1 Coax + RJ-48 Single-Fiber (2-slot module) |
SM | 20km | - | 8730-1 | - | - | - | 1310 | 1550 | -15 | -5 | -30 | -3 | 15 |
| SM | 40km | - | 8730-2 | - | - | - | 1310 | 1550 | -8 | 0 | -30 | -3* | 22 | |
| SM | 20km | - | 8731-1 | - | - | - | 1550 | 1310 | -15 | -5 | -30 | -3 | 15 | |
| SM | 40km | - | 8731-2 | - | - | - | 1550 | 1310 | -8 | 0 | -30 | -3* | 22 | |
For wide temperature (-40 to 60º C), add a "W" to the end of the model number.
Consult factory for extended temperature (-40 to +75º C) models.
When using single-fiber (SF) media converter models, the Tx wavelength on one end has to match the Rx wavelength on the other.
*A minimum of 3dB of attenuation is required for these models.
**See SFP data sheet under Fast Ethernet for supported transceiver models.
Chassis Ordering Table
| 19 Module | 5-Module | 2-Module | 1-Module | ||||||||
| Configuration | AC (60 watts) |
AC (120 watts) |
24VDC | 48VDC | AC | 24VDC | 48VDC | AC | 18-60DC | US AC | UNIV AC |
| One (1) Power Supply | 8200-1 | 8201-1 | 8206-1 | 8205-1 | 8220-1 | 8226-1 | 8225-1 | 8230-0 | 8235-0 | 8240-1 | 8240-2 |
| One (1) Power Supply with Dying Gasp Support | - | - | - | - | - | - | - | 8230-1 | 8235-1 | 8241-1 | 8241-2 |
| Two (2) Power Supplies | 8200-2 | 8201-2 | 8206-2 | 8205-2 | 8220-2 | 8226-2 | 8225-2 | - | - | 8245-111* | 8245-112* |
| Three (3) Power Supplies | 8200-3 | 8201-3 | 8206-3 | 8205-3 | - | - | - | - | - | - | - |
| Spare Power Supply | 8200-9 | 8201-9 | 8206-9 | 8205-9 | 8220-9 | 8226-9 | 8225-9 | - | - | - | - |
| 23" Rack Mounting Kit | 8091-2 | 8091-2 | 8091-2 | 8091-2 | 8092-2 | 8092-2 | 8092-2 | - | - | - | - |
| Blank Module Panel | 8090-0 | 8090-0 | 8090-0 | 8090-0 | 8090-0 | 8090-0 | 8090-0 | 8090-0 | 8090-0 | - | - |
| Wall Mounting Hardware Kit | - | - | - | - | - | - | 8249-0 | 8249-0 | 8249-0 | 8249-0 | |
| DIN Rail Mounting Kit | - | - | - | - | - | - | - | - | 8250-0 | 8250-0 | |
When ordering a Wide Temperature chassis, add a W to the end of the part number. For example:8230-1W
Consult factory for extended temperature (-40 to +75º C) models.
* Click on part number for complete ordering information on the 1-Slot Redundant Power Chassis with Power over Ethernet