iConverter OC12FF

• OC-12 multimode to single-mode fiber converter
• Supports multimode, single-mode, and single-fiber with SC connectors
• Supports distances up to 80km
• User-selectable link fault detection modes facilitate quick fault detection, isolation and reporting
• Management is available with the addition of a management module to the chassis
• SNMP management via NetOutlook® provides real-time port and module information, remote parameter configuration and trap notification
• Modules are hot-swappable in 19-Module, 5-Module, 2-Module or 1-Module chassis
• LED displays for immediate visual status of each port
• Lifetime Warranty and free 24/7 Technical Support

The iConverter OC12FF managed media converter is a member of the modular iConverter product family. The OC12FF provides multimode to single-mode fiber conversion and is a costeffective solution for extending network distances by connecting multimode fiber network devices over single-mode fiber cabling.

iConverter OC12FF models are available with multimode, single-mode, and single-fiber options. The single-mode fiber port supports SC connectors and distances up to 80km. The multimode fiber port supports SC connectors and distances up to 550m.

The OC12FF features user-selectable Link Propagate and Remote Fault Detection modes to facilitate quick fault detection, isolation and reporting.

iConverter OC12FF modules are hot-swappable and can be mounted in a 19-Module (2U high) or 5-Module (1U high) rack-mountable chassis (19-inch or 23-inch) with any combination of redundant AC, 24VDC or 48VDC power supplies. They can also be mounted in a 2-Module AC or 18 to 60VDC powered chassis, or in a 1-Module AC/DC powered chassis.

The iConverter family of managed fiber access media converters are used in Service Provider access networks and Enterprise LANs. iConverter media converters provide fiber connectivity with copper-to-fiber, multimode fiber to single-mode fiber, or dual fiber to single-fiber conversions.

View an Application Example

Management is accomplished by using a management module that provides monitoring, remote configuration and trap notification. The management module can be accessed via SNMP, Telnet, and via a serial port. The SNMP-based management is accomplished via Omnitron's intuitive, graphic-oriented NetOutlook management software or third party SNMP management software. Management via the Telnet and the serial interfaces have an easy-to-use, menu-driven interface.

Some of the real-time OC12FF parameters that can be monitored include link and data receive status. Other parameters include module type and model, hardware and software revisions, serial numbers and a user-defined identifier.

The user can override the OC12FF module's physical DIP-switch settings by using SNMP or Telnet to remotely configure DIP-switch-selectable parameters such as Link Propagate or Remote Fault Detection.

In addition to all standard iConverter SNMP traps such as module insertion and removal, the OC12FF modules can generate traps on port state changes including link-up and link-down. Trap monitoring of specific events can be selectively enabled or disabled by the network administrator.

For wide temperature (-40 to 60º C), add a "W" to the end of the model number.
Consult factory for extended temperature (-40 to +75º C) models.
When using single-fiber (SF) media converter models, the Tx wavelength on one end has to match the Rx wavelength on the other.
*A minimum of 3dB of attenuation is required for these models.

Chassis and Mounting Options Ordering Table

When ordering a Wide Temperature chassis, add a W to the end of the part number. For example:8230-1W
Consult factory for extended temperature (-40 to +75º C) models.
* Click on part number for complete ordering information on the 1-Slot Redundant Power Chassis with Power over Ethernet