- Home
- » Products
- » iConverter Overview
- » iConverter 1000FF
iConverter 1000FF
100BASE-FX Single-Mode to
Multimode Managed Fiber Converter
Click Image to Enlarge
Overview
- 1000BASE-SX or 1000BASE-LX single-mode to multimode fiber converter
- Supports multimode, single-mode and single-fiber with SC connectors
- Supports distances up to 80km
- User-selectable link fault detection modes facilitate quick fault detection, isolation and reporting
- SNMP management via NetOutlook® provides real-time port and module information, remote parameter configuration and trap notification
- Management is available with the addition of a management module to the chassis
- Modules are hot-swappable in 19-Module, 5-Module, 2-Module or 1-Module chassis
- LED displays for immediate visual status of each port
- Lifetime Warranty and free 24/7 Technical Support
The iConverter 1000FF managed media converter is a member of the modular iConverter product family. The 1000FF provides single-mode to multimode fiber conversion and is a cost-effective solution to extending network distances by connecting multimode fiber network devices over single-mode fiber cabling.
iConverter 1000FF models feature SC connectors and are available with multimode, single-mode and single-fiber options. The single-mode fiber port supports distances up to 80km, and the multimode fiber port supports distances up to 550m.
The 1000FF features user-selectable Link Propagate and Remote Fault Detection modes to facilitate quick fault detection, isolation, and reporting.
iConverter 1000FF modules are hot-swappable and can be mounted in a 19-Module (2U high) or 5-Module (1U high) rack-mountable chassis (19-inch or 23-inch) with any combination of redundant AC, 24VDC or 48VDC power supplies. They can also be mounted in a 2-Module AC or 18 to 60VDC powered chassis, or in a 1-Module AC/DC powered chassis.
The iConverter family of managed fiber access media converters are used in Service Provider access networks and Enterprise LANs. iConverter media converters provide fiber connectivity with copper to fiber, multimode fiber to single-mode fiber, or dual fiber to single-fiber conversions.
Management
Management is accomplished by using a management module that provides monitoring, remote configuration and trap notification. The management module can be accessed via SNMP, Telnet and via a serial port. The SNMP-based management is accomplished via Omnitron's intuitive, graphic-oriented NetOutlook management software or third party SNMP management software, while the Telnet and the serial interfaces have an easy-to-use, menu-driven interface.
Some of the real-time 1000FF parameters that can be monitored include power, link and data receive status.
The user can override the 1000FF module's physical switch settings by using SNMP or Telnet to remotely configure switch-selectable parameters such as Link Propagate or Remote Fault Detection.
In addition to all standard iConverter SNMP traps such as module insertion and removal, the 1000FF modules can generate traps on port state changes including link-up and link-down. Trap monitoring of specific events can be selectively enabled or disabled by the network administrator.
Specifications
| Model Type | 1000FF |
| Protocols | 1000BASE-SX, 1000BASE-LX |
| Connectors | SC, Single-Fiber SC |
| Controls | LP, RFD |
| LED Displays | Power, Fiber Optic link (2) |
| Dimensions | W:0.85" x D:4.5" x H:2.8" |
| Weight | 8 oz. |
| Compliance | UL, CE, FCC Class A, NEBS Level 3 |
| Power Requirement | 0.5A @ 3.3VDC (typical) |
| Temperature | Standard: 0 to 50º C
Wide: -40 to 60º C Storage: -40 to 80º C |
| Humidity | 5 to 95% (non-condensing) |
| Altitude | -100m to 4000m |
| MTBF (hrs) | 1,600,000 |
Ordering Information
| Model Type | Connector Type
SC/SC |
Fiber Type Port 1 Port2 |
Fiber Type Port1 Port2 |
Tx λ (nm) | Rx λ (nm) | Min. Tx Power (dBm) |
Max. Tx Power (dBm) |
Min. Rx Sense (dBm) |
Max. Rx Sense (dBm) |
Link Budget (dBm) |
| 1000FF Dual Fiber |
8642-1 | MM/DF | 220 / 550m1 | 850 | 850 | -10 | -4 | -17 | -3 | 7 |
| SM | 12km | 1310 | 1310 | -9.5 | -3 | -19.5 | -3 | 10 | ||
| 8642-2 | MM/DF | 220 / 550m1 | 850 | 850 | -10 | -4 | -17 | -3 | 7 | |
| SM | 34km | 1310 | 1310 | -5 | 0 | -23 | -3* | 18 | ||
| 8642-3 | MM/DF | 220 / 550m1 | 850 | 850 | -10 | -4 | -17 | -3 | 7 | |
| SM | 80km | 1550 | 1550 | -5 | 0 | -23 | -3* | 18 | ||
| 8643-2 | SM | 12km | 1310 | 1310 | -9.5 | -3 | -19.5 | -3 | 10 | |
| SM | 34km | 1310 | 1310 | -5 | 0 | -23 | -3* | 18 | ||
| 8643-3 | SM | 12km | 1310 | 1310 | -9.5 | -3 | -19.5 | -3 | 10 | |
| SM | 80km | 1550 | 1550 | -5 | 0 | -23 | -3* | 18 | ||
1000FF Port 2 |
8650-1 | MM/DF | 220 / 550m1 | 850 | 850 | -10 | -4 | -17 | -3 | 7 |
| SM | 20km | 1310 | 1550 | -9.5 | -3 | -20 | -3 | 10.5 | ||
| 8651-1 | MM/DF | 220 / 550m1 | 850 | 850 | -10 | -4 | -17 | -3 | 7 | |
| SM | 20km | 1550 | 1310 | -9.5 | -3 | -20 | -3 | 10.5 | ||
| 8652-1 | SM/DF | 12km | 1310 | 1310 | -9.5 | -3 | -19.5 | -3 | 10 | |
| SM | 20km | 1310 | 1550 | -9.5 | -3 | -20 | -3 | 10.5 | ||
| 8653-1 | SM/DF | 12km | 1310 | 1310 | -9.5 | -3 | -19.5 | -3 | 10 | |
| SM | 20km | 1550 | 1310 | -9.5 | -3 | -20 | -3 | 10.5 | ||
| 8652-2 | SM/DF | 12km | 1310 | 1310 | -9.5 | -3 | -19.5 | -3 | 10 | |
| SM | 40km | 1310 | 1550 | -3 | 0 | -20 | -3* | 17 | ||
| 8653-2 | SM/DF | 12km | 1310 | 1310 | -9.5 | -3 | -19.5 | -3 | 10 | |
| SM | 40km | 1550 | 1310 | -3 | 0 | -20 | -3* | 17 |
For wide temperature (-40 to 60º C), add a "W" to the end of the model number.
Consult factory for extended temperature (-40 to +75º C) models.
When using single-fiber (SF) media converter models, the Tx wavelength on one end has to match the Rx wavelength on the other.
*A minimum of 3dB of attenuation is required for these models.
1 62.5/125μm, 100/140μm multimode fiber up to 220m. 50/125μm multimode fiber up to 550m. Refer to the fiber cable manufacturer for multimode distance specifications.
Chassis Ordering Table
| 19 Module | 5-Module | 2-Module | 1-Module | ||||||||
| Configuration | AC (60 watts) |
AC (120 watts) |
24VDC | 48VDC | AC | 24VDC | 48VDC | AC | 18-60DC | US AC | UNIV AC |
| One (1) Power Supply | 8200-1 | 8201-1 | 8206-1 | 8205-1 | 8220-1 | 8226-1 | 8225-1 | 8230-0 | 8235-0 | 8240-1 | 8240-2 |
| One (1) Power Supply with Dying Gasp Support | - | - | - | - | - | - | - | 8230-1 | 8235-1 | 8241-1 | 8241-2 |
| Two (2) Power Supplies | 8200-2 | 8201-2 | 8206-2 | 8205-2 | 8220-2 | 8226-2 | 8225-2 | - | - | 8245-111* | 8245-112* |
| Three (3) Power Supplies | 8200-3 | 8201-3 | 8206-3 | 8205-3 | - | - | - | - | - | - | - |
| Spare Power Supply | 8200-9 | 8201-9 | 8206-9 | 8205-9 | 8220-9 | 8226-9 | 8225-9 | - | - | - | - |
| 23" Rack Mounting Kit | 8091-2 | 8091-2 | 8091-2 | 8091-2 | 8092-2 | 8092-2 | 8092-2 | - | - | - | - |
| Blank Module Panel | 8090-0 | 8090-0 | 8090-0 | 8090-0 | 8090-0 | 8090-0 | 8090-0 | 8090-0 | 8090-0 | - | - |
| Wall Mounting Hardware Kit | - | - | - | - | - | - | 8249-0 | 8249-0 | 8249-0 | 8249-0 | |
| DIN Rail Mounting Kit | - | - | - | - | - | - | - | - | 8250-0 | 8250-0 | |
When ordering a Wide Temperature chassis, add a W to the end of the part number. For example:8230-1W
Consult factory for extended temperature (-40 to +75º C) models.
* Click on part number for complete ordering information on the 1-Slot Redundant Power Chassis with Power over Ethernet