• The iConverter 10/FLT is an IEEE 802.3 compatible 10BASE-T UTP to 10BASE-FL fiber converter
• Supports multimode, single-mode, and single-fiber with ST, SC, LC and MT-RJ connectors
• UTP port automatically supports Full or Half-Duplex 10Mbps Ethernet
• UTP crossover switch eliminates the need for a crossover cable
• User-selectable link fault detection modes facilitate quick fault detection, isolation and reporting
• Management is available with the addition of a management module to the chassis
• SNMP management via NetOutlook® provides real-time port and module information, remote parameter configuration and trap notification
• Modules are hot-swappable in 19-Module, 5-Module, 2-Module or 1-Module chassis
• LED displays for immediate visual status of each port
• Lifetime Warranty and free 24/7 Technical Support

The iConverter 10FL/T managed media converters are members of the modular iConverter product family, and provide 10BASE-T UTP to 10BASE-FL fiber conversion.

The iConverter 10FL/T models are available with multimode, single-mode and single-fiber options. They support ST, SC, LC and MT-RJ connectors. The UTP port supports 10BASE-T in either Full or Half-Duplex mode. A UTP crossover switch eliminates the need for a crossover cable and facilitates connectivity to network equipment such as hubs, switches and workstations.

The 10FL/T features user-selectable Link Propagate, Link Segment and Remote Fault Detection modes to facilitate quick fault detection, isolation and reporting.

iConverter 10FL/T modules are hot-swappable and can be mounted in a 19-Module (2U high) or 5-Module (1U high) rack-mountable chassis (19-inch or 23-inch) with any combination of redundant AC, 24VDC or 48VDC power supplies. They can also be mounted in a 2-Module AC or 18 to 60VDC powered chassis, or in a 1-Module AC/DC powered chassis.

The iConverter family of managed fiber access media converters are used in Service Provider access networks and Enterprise LANs. iConverter media converters provide fiber connectivity with copper to fiber, multimode fiber to single-mode fiber, or dual fiber to single-fiber conversions.

»» Click Here for an Application Example

Management is accomplished by using a Network Management Module (NMM) or a media converter with integrated management (such as an iConverter 10/100M2) that provides monitoring, remote configuration and trap notification. The management module can be accessed via SNMP, Telnet and via a serial port. The SNMP-based management is accomplished via Omnitron's intuitive, graphic-oriented NetOutlook management software or third party SNMP management software. Management via the Telnet and the serial interfaces have an easy-to-use, menu-driven interface.

Some of the real-time 10FL/T parameters that can be monitored include link and data receive status. Other parameters include module type and model, hardware and software revisions, serial numbers and a user-defined identifier.

The user can override the 10FL/T module's physical DIP-switch settings by using SNMP or Telnet to remotely configure DIP-switch-selectable parameters such as Link Propagate, Link Segment or Remote Fault Detection.

In addition to all standard iConverter SNMP traps such as module insertion and removal, the 10FL/T modules can generate traps on port state changes including link-up and link-down. Trap monitoring of specific events can be selectively enabled or disabled by the network administrator.

Model Type	10FL/T
Protocols	10BASE-FL, 10 BASE-T
UTP Connectors	RJ-45
Fiber Connectors	SC, ST, LC, MT-RJ, Single-Fiber SC
Controls	LS/LP, RFD
LED Displays	Power, F/O Link, UTP Link
Dimensions	W:0.85" x D:4.5" x H:2.8"
Weight	8 oz.
Compliance	UL, CE, FCC Class A, NEBS 3 Level 3
Power Requirement	0.5A @ 3.3VDC (typical)
Temperature	Standard: 0 to 50º C Wide: -40 to 60º C Storage: -40 to 80º C
Humidity	5 to 95% (non-condensing)
Altitude	-100m to 4000m
MTBF (hrs)	830,000

Model Type	Fiber / Media Type	Distances	Connector Type				Tx λ (nm)	Rx λ (nm)	Min. Tx Power (dBm)	Max. Tx Power (dBm)	Min. Rx Sense (dBm)	Max. Rx Sense (dBm)	Link Budget (dBm)
			ST	SC	MT-RJ	LC
Gx AN Dual Fiber	MM	2km	8300-0	8302-0	-	-	850	850	-21	-11	-31	-11	10
	MM	5km	8300-1	-	8304-1	-	1310	1310	-24	-14	-31	-14	7
	SM	30km	8301-1	8303-1	8305-1	8307-1	1310	1310	-15	-8	-31	-8	16
	SM	60km	8301-2	8303-2	-	8307-2	1310	1310	-5	0	-31	-3*	26
	SM	120km	-	8303-3	-	8307-3	1550	1550	-5	0	-31	-3*	26
Gx AN Single- Fiber	SM	20km	-	8310-1	-	-	1310	1550	-15	-5	-30	-3	15
	SM	40km	-	8310-2	-	-	1310	1550	-8	0	-30	-3*	22
	SM	20km	-	8311-1	-	-	1550	1310	-15	-5	-30	-3	15
	SM	40km	-	8311-2	-	-	1550	1310	-8	0	-30	-3*	22

For wide temperature (-40 to 60º C) modules, add a "W" to the end of the model number.
Consult factory for other configurations and extended temperature (-40 to +75º C) modules.
When using single-fiber (SF) media converter models, the Tx wavelength on one end has to match the Rx wavelength on the other.
*A minimum of 3dB of attenuation is required for these models

Chassis Ordering Table

	19 Module				5-Module			2-Module		1-Module
Configuration	AC (60 watts)	AC (120 watts)	24VDC	48VDC	AC	24VDC	48VDC	AC	18-60DC	US AC	UNIV AC
One (1) Power Supply	8200-1	8201-1	8206-1	8205-1	8220-1	8226-1	8225-1	8230-0	8235-0	8240-1	8240-2
One (1) Power Supply with Dying Gasp Support	-	-	-	-	-	-	-	8230-1	8235-1	8241-1	8241-2
Two (2) Power Supplies	8200-2	8201-2	8206-2	8205-2	8220-2	8226-2	8225-2	-	-	8245-111*	8245-112*
Three (3) Power Supplies	8200-3	8201-3	8206-3	8205-3	-	-	-	-	-	-	-
Spare Power Supply	8200-9	8201-9	8206-9	8205-9	8220-9	8226-9	8225-9	-	-	-	-
23" Rack Mounting Kit	8091-2	8091-2	8091-2	8091-2	8092-2	8092-2	8092-2	-	-	-	-
Blank Module Panel	8090-0	8090-0	8090-0	8090-0	8090-0	8090-0	8090-0	8090-0	8090-0	-	-
Wall Mounting Hardware Kit	-		-	-	-	-	-	8249-0	8249-0	8249-0	8249-0
DIN Rail Mounting Kit	-		-	-	-	-	-	-	-	8250-0	8250-0

When ordering a Wide Temperature chassis, add a W to the end of the part number. For example:8230-1W
Consult factory for extended temperature (-40 to +75º C) models.
* Click on part number for complete ordering information on the 1-Slot Redundant Power Chassis with Power over Ethernet