- Home
- Products
- iConverter Overview
- iConverter 1-Module Chassis
iConverter 1-Module Chassis
1-Module Power Chassis
Module not included
- 1-Module Power Chassis with external AC adapter power supply or direct DC power
- DC input supports 20 to 60VDC
- Houses all models of hot-swappable iConverter media converter and switch modules
- NEBS Level 3 Compliant
- Optional wide temperature range of -40 to +60º C
- Management is available with the installation of an iConverter NID plug-in module with integrated management
- SNMP management via NetOutlook® provides real-time port and module information, remote parameter configuration and trap notification
- Models 8241-X and 8243-X support Dying Gasp (Power Loss Trap) through a management module
- Wall-mount or table-top options
- Lifetime Warranty and free 24/7 Technical Support
The 1 inch high 1-Module iConverter Power Chassis supports a single iConverter module and is powered by an external AC power adapter or external DC power source (20 to 60VDC). The 1-Module Power Chassis is designed for network edge, Customer Premises or Central Office deployments where compact size, low cost and flexible upgrades are important.
Any iConverter module can be installed in the 1-Module Power Chassis. The chassis supports managed edge demarcation applications when an iConverter Network Interface Device (NID) plug-in module with integrated management (such as a the 10/100M2 shown in the photo above) is installed in the chassis.
The chassis supports managed edge demarcation applications when an iConverter Network Interface Device (NID) plug-in module with integrated management (such as the 10/100M2 shown in the photos above) is installed in the chassis. Models with “Dying Gasp” support allow NIDs to send a power failure alarm in the event of power loss.
| Model Number | 8240-1 8241-1 |
8240-2 8241-2 |
8242-1 8243-1 |
8242-2 8243-2 |
8242-9 8243-9 |
| Module Capacity | 1 | ||||
| Power Supply Type | Wall Power Supply | Tabletop Power Supply | Tabletop Power Supply | Tabletop Power Supply | Internal DC Supply |
| Power Supply Connector | US Plug | IEC 320 Socket | US Power Cord | IEC 320 Socket | 3 Position Terminal |
| Power Requirements | 120VAC / 60Hz 0.13A @ 120VAC |
100 to 240VAC 50 / 60Hz 0.19A @ 120VAC |
120VAC / 60Hz 1.0A @ 120VAC |
100 to 240VAC 50 / 60Hz 1.0A @ 120VAC |
20 to 60VDC* 0.6A Max |
| Dimensions |
W:3.8" x D:5.5" x H:1.0" | W:3.8" x D:6.0" x H:1.0" | |||
| Weight | 1.5 lbs | ||||
| Compliance | UL, CE, FCC Class A, NEBS Level 3 | ||||
| Temperature Standard Operating Wide Operating |
0 to 50º C -40 to 60º C |
||||
| Humidity | 5 to 95% (non-condensing) | ||||
| Altitude | -100m to 4,000m | ||||
| MTBF (hrs) | 250,000 | 100,000 | 260,000 | 260,000 | 2,700,000 |
* Effective range is 18 to 60VDC when using a module without dying grasp support.
| Configuration | 1-Module Chassis 120VAC (US | 1-Module Chassis 100-240VAC (Univ) | 1-Module Chassis 120VAC (US) | 1-Module Chassis 100-240VAC (Univ) | 1-Module Chassis 48VDC |
| 1-Module Chassis | 8240-1 (3.3 Watts) |
8240-2 (3.3 Watts) |
8242-1 (8.3 Watts) |
8242-2 (8.3 Watts) |
8242-9 (8.3 Watts) |
| 1-Module Chassis with Dying Gasp Support | 8241-1 (5 Watts) |
8241-2 (5 Watts) |
8243-1 (8.3 Watts) |
8243-2 (8.3 Watts) |
8243-9 (8.3 Watts) |
| Wall-Mount Hardware Kit | 8249-0 | ||||
| DIN Rail Mounting Kit | 8250-0 | ||||
| NEBS Grounding Kit | N/A | 9123-0 | |||
For wide temperature (-40 to 60º C), add a "W" to the end of the model number. |
|||||
Consult the iConverter Power Calculator to ensure proper chassis wattage is selected
Product Downloads
- iConverter 1-Module
- Data Sheet
- User Manual
Related Products
iConverter Product Family
Related Information
Where to Buy
