iConverter Fiber-to-Fiber Media Converters and Transponders

iConverter fiber-to-fiber media converter modules provide single fiber to dual fiber and single mode to multimode fiber conversion. Select iConverter modules support VLAN switching capabilities and iConverter fiber-to-fiber Network Interface Devices (NIDs) feature integrated management and carrier-grade fault detection capabilities.

iConverter fiber-to-fiber Transponder modules support pluggable transceivers to provide conversion between standard 850/1310/1550 wavelengths and CWDM wavelengths. iConverter Transponders enable connectivity between legacy fiber switches with fixed fiber connectors and iConverter CWDM multiplexer modules.


Technologies Supported:

  • 1000BASE-X Ethernet
  • 100BASE-Fx Ethernet
  • 10 Gigabit Ethernet
  • OC3/STM1
  • OC12/ STM4
  • OC48/STM16
  • Protocol Transparent
    (Fibre Channel, SONET/SDH, Ethernet)

Fiber and Connector Types:

  • SFP, SFP+ and XFP Transceivers
  • SFP, SFP+ and XFP CWDM Transceivers
  • ST, SC, LC and MT-RJ Fixed Fiber Connectors
  • Single Mode and Multi-mode Fiber
  • Dual and Single Fiber

iConverter Fiber-to-Fiber Ethernet Converters

  • iConverter XG and XG+
    iConverter XG and XG+

    10Gbps Protocol-Transparent Media Converter/Transponder

    The iConverter XG is a 10 Gigabit, protocol-transparent media converter with two pluggable transceiver ports, supporting any combination of XFP and SFP+ transceivers. The unmanaged iConverter XG standalone converter supports 100% traffic throughput with no packet size restrictions. It can function as copper-to-fiber converter, a fiber mode converter, a WDM transponder or a fiber repeater.

  • iConverter xFF
    iConverter xFF

    SFP to SFP Protocol-Transparent Media Converter and WDM Transponder

    The iConverter xFF is a protocol-transparent managed media converter that provides reliable and cost-effective conversion between different wavelengths, multimode and single-mode, and dual and single-fiber networks.

  • iConverter 2GXM2
    iConverter 2GXM2

    1000BASE-X SFP to 1000BASE-X SFP Intelligent Media Converter and Network Interface Device

    iConverter 2GXM2 NIDs provide 1000Mbps fiber-to-fiber conversion with integrated management for secure optical Ethernet demarcation with 802.3ah OAM management and provisioning. Advanced features include VLAN, QoS and SFP fiber transceivers

  • iConverter 2GXM*
    iConverter 2GXM*

    1000BASE-X SFP to 1000BASE-X SFP Ethernet Media Converter and Network Interface Device

    *The iConverter 2GXM modules are not supported in future software releases and are not recommended for new designs or deployments. View the iConverter 2GXM2 web page.

  • iConverter GX/X
    iConverter GX/X

    1000BASE-X to 1000BASE-X Ethernet Switch and Fiber Media Converter

    iConverter GX/X manageable fiber converters provide Gigabit single-mode to multi-mode and single to dual fiber conversion, and function as two-port optical switch modules. Advanced features include VLAN and Port Access Controls.

  • iConverter GX/F
    iConverter GX/F

    1000X to 100FX Managed Ethernet Media Converter/Repeater

    iConverter GX/F manageable fiber converters provide Gigabit single-mode to multi-mode fiber and single to dual fiber conversion, and rate conversion between 1000BASE-X and 100BASE-Fx. GX/F fiber converters also function as an two-port optical switch modules. Advanced features include VLAN and Port Access Controls.

  • iConverter 1000FF
    iConverter 1000FF

    Gigabit Fiber-to-Fiber Managed Media Converter

    The FlexPoint 1000FF is a Gigabit fiber-to-fiber media converter that provides protocol-independent multimode to single-mode fiber conversion.

  • iConverter OC12FF
    iConverter OC12FF

    Multimode to Single-Mode Managed Fiber Converter

    The iConverter OC12FF media converters provide manageable multi-mode to single-mode and dual to single fiber conversion to extend network distances.

  • iConverter OC3FF
    iConverter OC3FF

    Single-Mode to Multimode Managed Fiber Converter

    iConverter OC3FF media converters provide manageable multi-mode to single-mode and dual to single fiber conversion to extend network distances.

  • iConverter 2FXM2
    iConverter 2FXM2

    100BASE-FX SFP to 100BASE-FX SFP Media Converter and Network Interface Device

    The iConverter 2FXM2 Network Interface Device (NID) with integrated management provides Fast Ethernet (100BASE-FX) fiber-to-fiber media conversion.

  • iConverter 2FXM*
    iConverter 2FXM*

    100BASE-FX SFP to 100BASE-FX SFP Media Converter and Network Interface Device

    *The iConverter 2FXM modules are not supported in future software releases and are not recommended for new designs or deployments. View the iConverter 2FXM2 web page.

  • iConverter 2Fx
    iConverter 2Fx

    100BASE-FX to 100BASE-FX Managed Fast Ethernet Media Converter & Switch

    iConverter 2Fx manageable fiber converters provide 100Mbps single-mode to multi-mode fiber conversion and functions as two-port optical switch modules. Advanced features include Q-in-Q VLAN Individual Port Bandwidth and Port Access Controls.

  • iConverter 100FF
    iConverter 100FF

    100BASE-FX Single-Mode to Multimode Managed Fiber Converter

    The FlexPoint 100FF is 100BASE-FX fiber-to-fiber media converter that provides protocol-independent multimode to single-mode fiber conversion.

Subscribe to this RSS feed

SFP Transceivers

  • Pluggable Optical Transceivers
    Pluggable Optical Transceivers

    Small Form Pluggable Optical Transceivers

    Omnitron pluggable transceivers are interchangeable compact media connectors that enable a single network device to connect to a wide variety of fiber and copper cable types and distances.

  • CWDM Pluggable Optical Transceivers
    CWDM Pluggable Optical Transceivers

    for CWDM Applications

    Omnitron pluggable transceivers are interchangeable compact media connectors that enable a single network device to connect to a wide variety of fiber and copper cable types and distances.

Subscribe to this RSS feed