Gigabit Media Converters

Find Products & Technologies


10/100/1000 Bridging Products

10/100/1000 Copper to 100/1000X Fiber Ethernet Media Converter

The FlexPoint GX/T is a 10/100/1000BASE-T copper to 1000BASE-X fiber media converter that supports jumbo frames up to 10,240 bytes. The GX/T features Small Form Pluggable (SFP) transceivers that support both 100BASE-FX and 1000BASE-X for interoperability with Gigabit and Fast Ethernet fiber equipment.

10/100/1000BASE T to 1000/10G Fiber Media Converter

The iConverter 10GXT is a 10/100/1000BASE-T copper to 1000BASE-X or 10GBASE-R fiber media converter, and is available as a compact, unmanaged standalone unit. The 10GXT supports 1000BASE-X or 10GBASE-R Small Form Pluggable (SFP/SFP+) transceivers or 10GBASE-X XFP transceivers.

10/100/1000BASE-T to 100/1000BASE-X
2-Channel Ethernet Media Converter

iConverter 2GXT Ethernet fiber media converters are members of the modular iConverter Multi-Service Platform. The 2GXT is a dual-channel media converter and four-port switch with two 10/100/1000BASE-T RJ-45 ports and two Small Form Pluggable (SFP) ports. The dual SFP fiber ports can be configured to provide 1:1 uplink protection with less than 50ms switchover when the 2GXT is deployed as a four-port switch.

4-Port 10/100/1000BASE-T Managed Ethernet Switch

The iConverter 4GT is a four-port 10/100/1000 Ethernet switch. It is available as a compact unmanaged standalone unit or a managed chassis plug-in module. The plug-in modules offers networking features including rate-limiting, traffic classification and prioritization, and VLAN capability.

Network Interface Devices

The iConverter GM3 is a flexible and cost-effective Network Interface Device (NID) with Service and Link Operations, Administration and Maintenance (OAM) capabilities. The GM3 provides Carrier Ethernet service demarcation with rapid service activation, SLA assurance and fault management.

Carrier Ethernet 2.0 Certified Compliant NIDs

The iConverter® GM4 is a Network Interface Device (NID) that delivers advanced Carrier Ethernet 2.0 services and provides demarcation at the edges of a network. The GM4 enables rapid service deployments, Service Level Agreement (SLA) assurances, comprehensive fault management and service protection.

Carrier Ethernet 2.0 NIDs with Power over Ethernet

The iConverter® GM4 PoE Network Interface Devices (NID) deliver advanced Carrier Ethernet 2.0 services and provide integrated Power over Ethernet (PoE) at the demarcation. GM4 PoE NIDs function as PoE Power Sourcing Equipment in small cell (metro cell) and WiFi applications, where the radio equipment can be powered through the Ethernet UTP cables.

10/100/1000BASE-T UTP to 1000BASE-X Managed Ethernet Media Converter

The iConverter GX/T media converters are members of the modular iConverter product family. The GX/T provides 10/100/1000 UTP copper to GigE fiber conversion and can be used in a managed or unmanaged fashion. The GX/T is ideal in network core or Central Office (CO) applications when conversion is required from a 10/100/1000 core switch to GigE fiber, and in edge applications when the GigE fiber is converted back into 10/100/1000 copper and delivered to a departmental or Customer Premise (CPE) switch.

10/100/1000BASE-T UTP to 1000BASE-X or 100BASE-X Managed Ethernet VLAN Media Converter

The iConverter GX/T2 media converters are members of the modular iConverter Multi-Serivce Platform. The GX/T2 is a 10/100/1000BASE-T UTP to 100BASE-FX or 1000BASE-X fiber media converter that supports jumbo frames up to 10,240 bytes. The GX/T2 is used for conversion from a 10/100/1000 UTP to Fast Ethernet or Gigabit Ethernet fiber, and supports both 100BASE-FX and 1000BASE-X Small Form Pluggable (SFP) transceivers.

10/100/1000BASE-T Copper to 1000BASE-X  Intelligent Media Converter and Network Interface Device

The iConverter GX/TM2 conforms to the Ethernet in the First Mile (EFM) fiber standards to support Fiber-to-the-X Metropolitan and Enterprise LAN networks. The GX/TM2 provides intelligent, securely managed service demarcation at the customer premises, offering Quality of Service and enhanced Bandwidth Control (rate-limiting) capabilities.

Network Interface Device with Dual Management and Provisioning

The iConverter HybridNID® is a Network Interface Device that enables the delivery of Carrier Ethernet 2.0 E-Access services across multiple-operator networks. With the iConverter HybridNID installed at the customer premises or cell tower, both a Service Provider and Wholesale Access Provider partner can independently provision, manage and monitor the Carrier Ethernet service.

T1/E1 and Ethernet Managed Multiplexer System

The iConverter Modular T1/E1 Multiplexer transports up to sixteen T1/E1 circuits and 10/100/1000 Ethernet over point-to-point fiber, CWDM channel or Ethernet Virtual Connection (EVC). This flexible and scalable system is comprised of an iConverter Fiber Transport module, and one or more iConverter 4xT1/E1 MUX modules installed in a 2, 5 or 19-module chassis.

Gigabit Fiber Media Converter

10/100/1000BASE-T to 1000BASE-X Ethernet Media Converter

The miConverter GX/T is a miniature 10/100/1000BASE-T UTP copper to 1000BASE-X fiber media converter that supports jumbo frames up to 10,240 bytes. The miConverter GX/T provides cost-effective fiber connectivity from Ethernet switches to diagnostic equipment, desktop and laptop computers.

Industrial 10/100/1000 Ethernet Media Converter

The miConverter GX/T is a bridging Gigabit media converter that supports SFP transceivers and jumbo frames up to 10,240 bytes.

10/100/1000BASE-T to 100/1000BASE-X Ethernet Media Converters with PoE Powering

The miConverter GX/T PoE/D is powered by Power over Ethernet (PoE) through the RJ-45 port when connected PoE switches and midspans to provide convenient and reliable fiber extension from PoE Power Source Equipment (PSE) in a variety of FTTx applications.

S/GXT Gigabit Ethernet Bridging Media Converter

 

The miConverter S/GXT Gigabit fiber to 10/100/1000BASE-T media converters weigh less than 2.5 oz. (72 grams) and are available with a convenient carrying case. 

10/100/1000 Media Converter with Power over Ethernet (PoE, PoE+ or 60W PoE)

The OmniConverter GPoE/S and GPoE+/S are multi-port media converters that convert 10/100/1000BASE-T copper to 1000BASE-X or 100BASE-FX fiber and support Power-over-Ethernet (PoE and PoE+). Classified as Power Sourcing Equipment (PSE), they can provide power to one or two Powered Devices (PDs) using standard UTP cables that carry the Ethernet data. 

Cost-Effective 10/100/1000 Media Converter with Power over Ethernet (PoE or PoE+)

The cost-effective OmniConverter GPoE/SE multi-port media converters provide 10/100/1000BASE-T copper to 1000BASE-X fiber conversion and support Power-over-Ethernet (PoE and PoE+). Classified as Power Sourcing Equipment (PSE), they can provide power to one or two Powered Devices (PDs).

Ask a Question

(*) Required field

1000 characters left